Baja claw question

[sickcivic95]

Has anyone stretched a 1.9 Baja claw NON TTC over a 2.2 rim? I'm just trying to get an idea of what they will look like if I went this route. Hell even if you have the larger ones done this way I'd like to see some pics. Thanks for any help and pics you guys may have.

Not the larger 1.9" 4.75" TTC tire:

Mickey Thompson 1.9 Baja Claw TTC Scale Tires (pair)

The smaller Baja claw 1.9 4.19" tire is what I'm looking for?

Mickey Thompson 1.9 Baja Claw 4.19" Scale Tires (pair)


--Dan

 

[89lxmorepower]

Why not run the 2.2 version of the baja claw ttc

 

[stricker76]

Too tall im guessing.

 

[sickcivic95]

Stricker is right, they are to tall. Plus I'm NOT running the TTC version.

I needed something shorter height wise but not really narrow and I liked the Baja claw tread pattern. I want to have a vertical sidewall from the rim to to treads, not where it dips in and looks like a bowl. But I didn't want to have to go to a super narrow tire to get this either.

So I figured if I stretched this tire over a 2.2 it would still have decent height and because the width is not to small I should have a decent sidewall look. By the way I'm running these on a scale truck not a crawler.

To compare the tires here's some specs on them.

The 1.9s I have are the non TTC which are 4.16" tall, VS. the TTC which are 4.75" height.
But they have the similar width at 1.58" VS. 1.75"
unlike the reg baja mtz which is 4.19" tall but is even narrower at 1.28"

If you go,up into,the 2.2 they are even taller at 5.7" tall and wider at 2.07" which just doesn't work at all. This will give me that look I don't want.

--Dan

 

[89lxmorepower]

from what i was seeing there all ttc there is no non ttc claw out for the scaler

 

[Jus]

from what i was seeing there all ttc there is no non ttc claw out for the scaler