• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

Battery Upgrade

The battery is easy to get to and change so I don't see the need to slap big heavy packs. just get a couple of small packs.

I ran a 2200 3s and got about 45mins of runtime out of it i think... didn't time the session. I had another pack ready to go...


tbh it aint that big, and it certainly aint heavy. I'm the opposite cant be dealing with pockets full of batteries and having to change them. I noticed last weekend how much difference there was between my 1800 and 2000 especially into 50% of its run time.
My car is not squatting any lower on these. But note I am using mine for crawling.
 
tbh it aint that big, and it certainly aint heavy. I'm the opposite cant be dealing with pockets full of batteries and having to change them. I noticed last weekend how much difference there was between my 1800 and 2000 especially into 50% of its run time.
My car is not squatting any lower on these. But note I am using mine for crawling.

true. Since i'm in NYC and don't own a car to get to run spots I tend to travel light. so less batteries and tools the better.
 
Think ill try the rc18 pack then if not guess ill suck it up and go to the LiPo . It's just too cool a RC not to buy .
 
Will a 3 cell hurt it all all?

A three cell nimh or 3s lipo? A 3 cell nimh would probably last a few minutes...just creeping along (OG Tamiya). A 3s lipo would toast the stock esc. Plenty of guys are running 3s, but they have upgraded the electronics and geared accordingly.
 
I'm upgrading to Holmes Hobby ESC so what 3s lipo we using to substitute for the 4000mAh dynamite? I want a big battery
 
Im runing a holmes brxl and an old 12t double in mine right now. Im also running the large 3300 2s losi pack for the lcc. Run time with that is about 25 minutes with ample full throttle runs. I did try that setup with a 1300 3s I have for a crawler. It is so crazy i didn't run it long for fear of hitting something and having to replace half the vehicle! 3s is insane with a 12t! later.
 
Im runing the Dynamite 2s 4000mah . It is the factory battery upgrade and the run time is about 1.5hr of run .



d02a0f21-9f92-4d0e-b91d-09e87a11371d_zpsda2d9171.jpg
 
So there are a few people running turnigy 3s lipos. And Turnigy has a few different 2200mAh 3s cells ranging from 20c-60c, costing from under $10 to about $20 a piece.

What are most people's opinions on Turnigy's lipos?
I don't want to deal with a cheap pack that could possibly vent with flame without provocation.

Anyone know of a site where you can narrow search results by battery size dimensions, rather than capacity, charge, and discharge rate? Or does anyone know of some 3s lipo cells that will fit in the stock twin hammers' battery tray?
 
Hi! Need yours help!
I'm a greedy noob - ordered TH and a huge LiPo 5200 (140x48x25mm). Can I somehow fit it onboard? Or just to buy something fittable?
 
Back
Top