-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
best knuckle weights?
- Thread starter Turtlejon
- Start date
Natedog
I wanna be Dave
Sure and yes more is generally better (I'm sure there's too much at some point lol) it helps the edges of front tires dig in and pull up over steep/difficult climbs, also as you steer it drops the front ride height helping weight transfer. Yes, more caster is more likely to cause link and/or shock, steering linkage, panhard clearance problems. I'd say 20* is about max you'd want, so G-Made must have done some homework. 
Hey thanks Nate "thumbsup"
Natedog
I wanna be Dave
You're welcome Casey!
rockhugger
RCC Addict
I agree with Nate. Given the option I'd go with 20 degrees, keeping in mind it may change the high speed handling if that's how the rig is used. I think the low speed crawling benefits (especially on climbing ledges) are well worth it.
Inspector86
RCC Addict
It would be very helpful if we could get the various manufacturers to publish the caster numbers of their aftermarket TRX4 C-hubs.
Teng
RCC Addict
Good read and wonderful guys here."thumbsup"
Any thoughts on the Locked Up RC steel parts?
TRX-4 Black Steel C Hubs
Seems like at least for the C's they would be more durable vs. rocks and are slightly heavier than the ones posted above.
I have been considering that set up for a white now.
TRX-4 Black Steel C Hubs
Seems like at least for the C's they would be more durable vs. rocks and are slightly heavier than the ones posted above.
I have been considering that set up for a white now.
I've got 'em on both of my TRX4's ( Bronco and Defender). Absolutely top-shelf product. Flawless fitment with stock TRX4 parts and it gets that nice heavy weight right down as low as you can go. I've beat on 'em pretty good at this point and they are as durable as it gets. Highly recommend.
