blackfoot
Quarry Creeper
Yup, with the right body it will, or bodiless it will for sure.
-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
Blackfoots CC01 Project with Some simple DIY Mods
- Thread starter blackfoot
- Start date
blackfoot
Quarry Creeper
What body is that? I NEED details and measurements!
pantablo
I wanna be Dave
I'm going to have to hook you up with some hybrid tires Mike!"thumbsup" :mrgreen:
That is a Fast Line body don't know what year it came out but from what I was told by another local Guy that has one they are Very Hard to find it had a MP3 player in it
My hinge setup at work.
More info needed "thumbsup"
I have my H2 setup like this but really haven't look at it for the CC01 yet so if you can save my the sleepless nights that would be great!! LOL.............
j0e
Rock Crawler
actually its Fast Lane; came out i think in 07 and are indeed hard to find.
i have a new body set aside for a tt-01 build and a second full rig still in the box!
"thumbsup"
theyre a little small (like 1/12) but very nicely detailed.
also, the back can come off to ne a SUT style bed.
blackfoot
Quarry Creeper
I used the existing body mount posts that held this hardbody to its stock chassis, cut off some BIC pen tubes to slide ocer the setup reinforce them, then epoxied them inplace, screwed on some link ends and used TLT Cantilever link mounts screwed to the CC01 fenders.
I did something simular to The MAN build.
http://www.rccrawler.com/forum/showthread.php?t=183970
RockEd out
Pebble Pounder
Looking good Scotty, when ya going to build me ONE LMAO!
blackfoot
Quarry Creeper
Yes, its possible and very easily done. You must not have the gears perfectly lined up. Its sometimes a little tricky to do and takes a few tries. Once you have it all lined up correctly, it will slide in and bolt together.
blackfoot
Quarry Creeper
Done Finally! Made a bumper for my 3Racing winch as well as set it up with the RC4WD Crawler 3 channel 2.4ghz radio I just did a swap for. I couldn't be happier with it. The bumper stick out so far, because the body is hinged to tilt foward to access the battery connection.
docsbear
Rock Stacker
does that radio work with your winch?
How did you set it up?
Good lookin rover by the way"thumbsup"
How did you set it up?
Good lookin rover by the way"thumbsup"
blackfoot
Quarry Creeper
Well, the radio is as basic as it gets, but it works. The winch is either powered off position 1 of the 3rd channel, positionl 2 will make it reel in and position 3 will shut off the steering and you control the winch fucntions with the steering wheel, which kinds blows as you have no steering, but I have the winch more for looks then anything else.
shadowknight
Newbie
do you have some picture's off the rear axel and those links because i want to make it also like that
blackfoot
Quarry Creeper
Post #3 explains the procedure and what you need to accomplish it.
Last edited:
steben
Newbie
"thumbsup" Great suggestion about the front diff lock. I was wondering as I was building it what to do. It wasnt till I saw your post and thought the spare gears from the rear diff (used diff lock in rear) can be used in front to lock it. I might put all 6 in front for strength (yes over the top but it should work).
Thanks for you ideas Im starting research today on what is needed to fix and lift suspension. Thanks again for your detailed work."thumbsup"
Thanks for you ideas Im starting research today on what is needed to fix and lift suspension. Thanks again for your detailed work."thumbsup"
