Bodies for ax10 deadbolt

[Spencecrawler]

Hi all, I was wondering if this body: Pro-Line 3248-00 1980 Chevy Pickup Clear Body Revo | eBay

I really like this thread: http://www.rccrawler.com/forum/axial-ax10-2nd-gen/396564-wrangler-ridgecrest.html
I want that body, not sure if this is the same body? http://www.ebay.com/itm/Pro-Line-20...626208?hash=item48598668e0:g:4YUAAMXQV0BSKkpx

Would that fit my ax10 deadbolt with some trimming?

Also what other jeep bodies would workout too? With some trimming?
I am really sick of the stock ugly shell..


since its so tricky to get a pic of my truck,
I have the following upgrades:
1230sg servo
axial universals
axial metal center case gears
proline super swampers g8 2.2" with axial rocksters 2.2"
STRC steering links along with a metal servo horn
metal lower links custom ones(stock length tho with traxxas revo rod ends)
and a sensorless bl system geared low but for slight wheel speed, and crawls pretty good how I have it setup with the punch set to low and the timing set to low


My next pair of upgrades was to get a nice new shell, and do the traxxas big bores with the cap mod...


Thanks
-Spence

I guess I know the wrangler 4 door https://www.prolineracing.com/bodies/jeep-wrangler-unlimited-rubicon-clear-body/
With trimming will fit thanks I guess I answered my own question again I really hope it fits
I mean 12.5" is like totally the ax10 wheelbase, and width its 6.5"

I just made my choice of a 1992 Pro-Line Jeep Grand Cherokee body, going to paint it Tamiya Pure orange

 

[Mike Flea]

If you go to pg 4 of the Picture Archive at the top of the page,, post #62, I used 3 different bodies on the AX-10. The Jeep body I used is from HPI, you may be able to find one at your local hobby store, or e-bay, or check out the whole thread, you might find something else you like.

 

[mewalsh100]

I used a Parma pickup body - Looks a little like the new Jeep pickup. (It looks like it has since been discontinued). Turned out well though. Had to trim the wheel arches out quite a bit as expected. But, overall it fits well and the wheelbase is just about right. 2 tone metallic green and pearl white. I also installed a roof rack that extends in to the bed.