Cordless Screwdriver

[DrIsotope]

While I am a longtime Bosch user (and still using a horrifically overpowered GSR12V) I would recommend to people something 4 volt, like a Ryobi HP54L. I've had one of the original Ryobi TEK4 drivers for years, and it works great. It's a shame Ryobi pretty much abandoned that TEK4 platform-- I still have the matching infrared thermometer, which comes in equally handy for temping motors and ESCs.

Regardless of what driver you go for, make sure it has removable batteries. My original Bosch Impactor (from 2006? Earlier?) still chugs along, but its original batteries are long gone. Hell, the replacements for it's original batteries are long gone.

 

[swervo]

Damn, that thing is sweet. Not taking 1/4" bits is a deal breaker for me, though.

I was annoyed too but ten minutes with a hand file
And you're done ."thumbsup"

 

[BroncoAZ]

I purchased the Dewalt DCF680N2 years back for $100. Works great to this day and the clutch is fine enough it’s safe for plastic. I held out for a while, but when working on my Bomber repeatedly removing the cage and such I caved and spent the cash.

https://www.homedepot.com/p/DEWALT-...-0Ah-Batteries-Charger-Bag-DCF680N2/204473425

 

[swerv512]

I purchased the Dewalt DCF680N2 years back for $100. Works great to this day and the clutch is fine enough it’s safe for plastic. I held out for a while, but when working on my Bomber repeatedly removing the cage and such I caved and spent the cash.



https://www.homedepot.com/p/DEWALT-...-0Ah-Batteries-Charger-Bag-DCF680N2/204473425

Thanks for this one. I'm heading to Home depot today to put it in my hands. Reasonable enough pricing...

Sent from my SM-G973U1 using Tapatalk

 

[DRED805]

Thanks for this one. I'm heading to Home depot today to put it in my hands. Reasonable enough pricing...

Sent from my SM-G973U1 using Tapatalk

It’s the only yellow tool I own… haha

 

[mOOsE]

I've tested a few, as I had the fortunate situation to verify torque with a calibration tool. After many... I stuck with this.

https://www.amazon.com/Genesis-GLSD...QQXH/ref=dp_prsubs_1?pd_rd_i=B084D1QQXH&psc=1

The lowest level of torque applied will not strip most RC screws, even on micro-scale. I want to say the lowest setting was around 1 inch pound. It's basically a screwdriver designed for RC use.

 

[AK KRAWLER]

I've tested a few, as I had the fortunate situation to verify torque with a calibration tool. After many... I stuck with this.

https://www.amazon.com/Genesis-GLSD...QQXH/ref=dp_prsubs_1?pd_rd_i=B084D1QQXH&psc=1

The lowest level of torque applied will not strip most RC screws, even on micro-scale. I want to say the lowest setting was around 1 inch pound. It's basically a screwdriver designed for RC use.

That looks like a neat little tool worth trying out. Thanks for the info! "thumbsup"

 

[XJ_Crawler]

And so it begins...


https://www.homedepot.com/p/Milwauk...teries-Charger-and-Tool-Bag-2401-22/100615066

Here is my Question back to the OP. How many M12 tools do you own now?

I started with this, then got the drill chuck, then an impact for my 1:1, I think I have 12 tools all together now.

 

[DRED805]

Here is my Question back to the OP. How many M12 tools do you own now?

I started with this, then got the drill chuck, then an impact for my 1:1, I think I have 12 tools all together now.

M12, I've got...

Surge impact
Fuel hammer drill/driver
Fuel hackzall
Sub-compact band saw
3" cutoff saw
5-3/8" circular saw
SDS plus roto hammer
3/8" ratchet
Tire inflator
Soldering iron
Rotary tool
Stapler
Bluetooth Radio
Jig saw
Palm nailer
Portable power source/charger... I think that's it.

M18: easier to list what I don't have. :lmao:

 

[DRED805]

I almost forgot about my favorite m12 tool!