Calderwood
I wanna be Dave
Re: Exclusive review of the Axial YETI AX90026
Put steering knuckles on it and lock them out with some toe in.
Put steering knuckles on it and lock them out with some toe in.
-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
Exclusive Review Axial Yeti ax90026
- Thread starter badger
- Start date
MeanTT
Rock Crawler
Great video. Just one queation. What's the top speed? Kinda hard to tell with the slow motion and the varied terrain. All of my bashing spots allow for high speed and are very large, so I can use all the assets a vehicle has to offer. It looked like high 20s, but there are so many different variables I can't get a realistic eatimate. Heck, it would be great to see one next to a twin hammers or running both at the same time. I think the larger size may give the impression of a slower speed, we all know how that goes!
Sent from my SAMSUNG-SM-G900A using Tapatalk
Sent from my SAMSUNG-SM-G900A using Tapatalk
Re: Exclusive review of the Axial YETI AX90026
Any room to narrow the width on this thing with hexes or hubs without running into interference in the front? That is a potential deal breaker for me. Still thrilled that Axial is putting this thing out there no matter what. "thumbsup"
Any room to narrow the width on this thing with hexes or hubs without running into interference in the front? That is a potential deal breaker for me. Still thrilled that Axial is putting this thing out there no matter what. "thumbsup"
Grimace83
Pebble Pounder
Re: Exclusive review of the Axial YETI AX90026
want want want!
can't can't can't
want want want!
can't can't can't
AWraith build
Quarry Creeper
Re: Exclusive review of the Axial YETI AX90026
http://rccrawler.smugmug.com/Crawlers/Axial-Yeti/i-LWDd48z/0/XL/353A9846-XL.jpg looks like the fronts are sucked in as far as possible the rears can
http://rccrawler.smugmug.com/Crawlers/Axial-Yeti/i-LWDd48z/0/XL/353A9846-XL.jpg looks like the fronts are sucked in as far as possible the rears can
bilinvic
I wanna be Dave
Re: Exclusive review of the Axial YETI AX90026
Just what the doctor ordered. I can't wait to get mine. My son may inherit a fully decked out Wraith now!!!!!
Just what the doctor ordered. I can't wait to get mine. My son may inherit a fully decked out Wraith now!!!!!
Re: Exclusive review of the Axial YETI AX90026
Are the skinny jean wearing minions the ones that built and designed this thing? Like college educated super smart boring engineer types? I always thought it would've been some badass inked up gruffly lookin dudes that would ride home on Harley's and crotchet rockets....
Are the skinny jean wearing minions the ones that built and designed this thing? Like college educated super smart boring engineer types? I always thought it would've been some badass inked up gruffly lookin dudes that would ride home on Harley's and crotchet rockets....
Re: Exclusive review of the Axial YETI AX90026
Better just add the servo for 4ws and really have fun with donuts8)
Better just add the servo for 4ws and really have fun with donuts8)
DowntownScience
Rock Crawler
Machined screw's or self tapping throughout? Curious if Axial decided those self tappers are poop.
Sent from my SCH-I545 using Tapatalk
Sent from my SCH-I545 using Tapatalk
Absurd
Quarry Creeper
Re: Exclusive review of the Axial YETI AX90026
You know honestly I own almost one of every axial rc including nitro stuff and This one I was really to pass on it until I seen the one thing that I wanted to see and sold me on it, I do not care I just want it take my damn money and gimmie lol
here is why.. I made a gif of a part of the video that made me drool "thumbsup"
You know honestly I own almost one of every axial rc including nitro stuff and This one I was really to pass on it until I seen the one thing that I wanted to see and sold me on it, I do not care I just want it take my damn money and gimmie lol
here is why.. I made a gif of a part of the video that made me drool "thumbsup"
Re: Exclusive review of the Axial YETI AX90026
@ 3:47 is the skinny jean wearing lead designer of the Yeti. He's a great kid but nerdy as all hell. From what I was told is that Axial wanted to hire him right out of middle school at the age of 13 but since he wasn't of legal age to work in California Axial had to become his his legal guardian which he was ok with because it finally got him out of the orphanage.
@ 3:47 is the skinny jean wearing lead designer of the Yeti. He's a great kid but nerdy as all hell. From what I was told is that Axial wanted to hire him right out of middle school at the age of 13 but since he wasn't of legal age to work in California Axial had to become his his legal guardian which he was ok with because it finally got him out of the orphanage.
gbean
RCC Addict
BAJABILL
Rock Stacker
Re: Exclusive review of the Axial YETI AX90026
These pictures made up my mind to order one . But the video just makes me want drive it today . Looks like a great setup thanks for video .
These pictures made up my mind to order one . But the video just makes me want drive it today . Looks like a great setup thanks for video .
Last edited:
Re: Exclusive review of the Axial YETI AX90026
I'm always serious. Had to give him up when I was 10, bitch said the bag broke and I wasn't about to retake 5th grade with a kid strapped on my back!
I'm always serious. Had to give him up when I was 10, bitch said the bag broke and I wasn't about to retake 5th grade with a kid strapped on my back!
Re: Exclusive review of the Axial YETI AX90026
I think it's probably still self tapping as it has deeper threads to bite into the plastic. Same reason VP used 4-40 on the SLW hub... deeper thread engagement.
I think it's probably still self tapping as it has deeper threads to bite into the plastic. Same reason VP used 4-40 on the SLW hub... deeper thread engagement.
Re: Exclusive review of the Axial YETI AX90026
I have done the slash/scx10 setup on my wrexo but it would be a ton cheaper if they made a specific kit fot the exo and the driveshafts allways hit my shocks when mounted in the stock position onboard the a-arms. A set with those dogbone style thinner shafts like is also available for the slash would be a winner IMO
I have done the slash/scx10 setup on my wrexo but it would be a ton cheaper if they made a specific kit fot the exo and the driveshafts allways hit my shocks when mounted in the stock position onboard the a-arms. A set with those dogbone style thinner shafts like is also available for the slash would be a winner IMO
DowntownScience
Rock Crawler
yes deeper but less of them and they back out so easy.
Sent from my SCH-I545 using Tapatalk
Arctic Fire
Rock Crawler
Re: Exclusive review of the Axial YETI AX90026
..so there's still time to change the name? (j/k)
..so there's still time to change the name? (j/k)
Jay-Em
Rock Crawler
Re: Exclusive review of the Axial YETI AX90026
If so, they could try to pull a "Tamiya" with those bizarre ingrish names, say "Barmy Badger"or "Rabid Badger" orr..ehrmm.. "Bangin.... Err..
no,
"Ragin' Badger"?
Something sweet? "Bouncy Badger"? Would fit that frilly pink/blue paint scheme :ror:
Nah. I really prefer the "Yeti" name.
I do not associate "Badger" with the ferocious Honey Badger, but with the rather shy and tubby badgers we got overhere.
If so, they could try to pull a "Tamiya" with those bizarre ingrish names, say "Barmy Badger"or "Rabid Badger" orr..ehrmm.. "Bangin.... Err..
no, "Ragin' Badger"?
Something sweet? "Bouncy Badger"? Would fit that frilly pink/blue paint scheme :ror:
Nah. I really prefer the "Yeti" name.
I do not associate "Badger" with the ferocious Honey Badger, but with the rather shy and tubby badgers we got overhere.