Gmade Team ZERO Shock.....anyone running them?

[v4impactor]

To anyone using the Gmade Team ZERO Shock, can I get some feed-back on them. Thinking about ditching out my GPM shocks and going with the Gmade. I've read in some prior post that the springs are a little stiff. Also what weight oil is included with them. Gmade boldly states you get a bottle of oil but it doesnt specify what weight. Thanks!

 

[Georgerm]

i use them and i love them. i do not know what wheight oil comes with them it does not say. the springs are a bit stiff but it is not that big of a problem to me.

 

[Deezul]

they rock. direct bolt on. i added lighter oil........

 

[tubed-n-lubed]

I loved them but the set I have on ebay right now were just too long for my current setup. They were 124mm & I am now using an 85mm shock. But the Gmade Zero shocks perform well if a bit stiff but I was using them laid down so they worked well. Not as stiff as a stock ax10 shock.

 

[v4impactor]

tubed-and-lubed, I actually looked at buying your set off eBay but the 124mm are to long for my needs as well. I'm thinking the 104mm.

 

[tubed-n-lubed]

tubed-and-lubed, I actually looked at buying your set off eBay but the 124mm are to long for my needs as well. I'm thinking the 104mm.

Yeah I used them with a 10mm spacer inside to make them a bit shorter because that is what I had but if you gotta buy some buy the length you need.

I actually really like the roadtech shocks for the Cen mg10, very nicely built shock.

 

[highlandcrawler]

I love mine. Im using them with a widow and moa set up. Im using half droop half sprung. They have a large shaft and are very smooth. I like the shortys for my truck"thumbsup" Pretty much figure on getting new oil and springs. Losi springs work ok but are a tinny bit smaller