SurfinStud
Pebble Pounder
I rearranged the electronics this evening because the wires sat too tall and still effected how the body would rest...
So, I removed the rear aluminum brace and made a bracket for the ESC to sit upright. This made it possible to set the ESC lower into the chassis(without interfering with the four link) thus making the entire height of the rolling chassis shorter. Meaning the wires no longer interfered with the body. Also, it lowered the COG(maybe?) and reduced the weight in the rear slightly.
Ill be cutting up another Gelande2 body to make a half cab/truck style d90. So, I needed those wires rerouted to make that an easy swap body just like the current godzooky body is to remove/replace. (Velcro in front and magnets in rear) That body will also host a driver with basic interior.
Sent from my VS987 using Tapatalk
Last edited:
