• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

Good Lipo?

I asked the same question on another forum and was told to get the 8200mah lipos from SPC. I am after more run time on the battery and the 8200mah gives me that. the guys on the other forum indicate 2 hour run time crawling and 1 to 11/2 hrs bashing. The C value is the rate at which the batery can discharge power. With a Summit you do not need the 65 C in a stock configuration, It is not going to run any faster but could tear the truck up. I heard from Tom at SPC and they should have a delivery mid march of the 8200mah. So ive decided to wait and get the 8200mah, plus they are $15 a piece less money.
 
Both, you will get a little more speed with a 2s not ALOT faster but a little and also increased run time, if you looking for speed go brushless. I always run lipo in all my RC weather it be a crawler or a 70+ mph truggy. IMO lipos are worth the $ just my 2 cents.
 
Hi
I have the turnigy nanotech 7600 and in crawling I get 1 1/2 hour in run time, and bashing I get about 50 minutes. For 48$ each I think they are a very good choise. Check it out at hobbyking.

Skickat från min GT-P7510 via Tapatalk 2
 
Back
Top