• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

GT3B Hack Question and Answer Thread

benoj said:
i was having the same problem as spoo76 on the family comp with 7 with it saying a problem occured and it will need to close the program so i tried it on my own comp with 7 and it didnt do it, instead the instant i hit program it says not responding but if i leave it for a min or 2 it responds and programs it fine. dam newer computers
Click to expand...

Yea according to the error message spoo76 posted, windows 7 is basically trying to prevent a virus. There is the same protection in xp and vista but the driver disables it, it must not disable it in 7. I'll look around and see if i can find out if windows 7 for sure is the problem, and if there is a fix...windows 7 users may have to use the more expensive st link which can program all st micro chips not just the stm8s.
 
First off I wanted to say awesome job Losikid putting this kit together. "thumbsup"


So I have several PC's (8 to be exact lol) My newest box is having the same issues as the others although I am working in XP (7 is the devil) I got it working on my laptop with the same XP version as the box. I am thinking it must be something with an update or screwy driver. I am working on it and will try it on my windows 7 box that also does not work. Looking for a solution for those that don't have a couple boxes to try.
 
losikid said:
yea you just need another header...i'll go add them to my site, i have like hundred of them, i'll also add the other stuff as well.

Programming is real simple...if you need help lmk. I'm still trying to get caught up on afew other things, but i'm hoping i can spend some more time making a easier manual to use here late next week.
Click to expand...

Thanks for the info, I'm building a rig for my daughter and if this hack works well for me, I am going to get her the same radio. Thanks for offering the connector seperately, now I dont have to scour the net to find one. I almost feel bad @ $.75 though, wouldnt mind paying a few bucks for one, saves me a trip to FRY's! Thanks!"thumbsup"
 
getbent said:
Thanks for the info, I'm building a rig for my daughter and if this hack works well for me, I am going to get her the same radio. Thanks for offering the connector seperately, now I dont have to scour the net to find one. I almost feel bad @ $.75 though, wouldnt mind paying a few bucks for one, saves me a trip to FRY's! Thanks!"thumbsup"
Click to expand...

I buy them in big long strips and cut them down, most of the $.75 is the paypal fee, also remember shipping costs...
 
getbent said:
My kit made it in thursday, thanks for the fast shipping. Installation should be a breeze, but after reading through the programming instructions, I have to admit Im a little overwhelmed now. Hopefully losikid's programming instructions will be a little easier to understand for a computer illiterate fellow such as myself, lol.. One quick question, if I buy a second transmitter, can I use my current kit to program it too? Or would I have to buy another kit? I know I would have to buy another 4 pin connector to solder onto the tx board, but that shouldnt be a problem. Just wondering
Click to expand...

same here, got mine Thursday but haven't messed with it yet.

thanks Losikid. I ordered my 6ch rx's the day I did a pre order so it's just waiting on me now :ror:
 
OK....would this make the ultimate scaler radio. With throttle , steering + 6 more 3 position chanels?

What are the options with this radio?
I have a DX3S that just aint gona cut it in the TTC build.
 
I bought this radio just for my scaler,it has a lot of options especially with the hack,not to mention, it also has farther range than spectrum
 
DwaneO said:
OK....would this make the ultimate scaler radio. With throttle , steering + 6 more 3 position chanels?

What are the options with this radio?
I have a DX3S that just aint gona cut it in the TTC build.
Click to expand...

Yea its the ultimate scaler radio

Um theres 2 3 pos switches, then 2 (2) push button switches, that will act as a 3 pos, then theres 2 or 3 single push button switches that can do up to 8 positions.

The 3 pos switches, and 2 push buttons can be programmed so they can act as single push buttons, giving you 11 8 position switches max...if you were to use them this way.

The ch 3 button can be converted to a 3 pos, so you could actually have 5 3 pos switches.
 
I will if you replace it if it does not work afterward.

never mind I see you figured it out at rctech
 
Last edited:
ok well when i broke mine in two it gave me worse fits than when they were together. So if you have broken yours in two, and it still won't read swim, here's the procedure i have had to do.

Plug in radio to programmer
Plug programmer into computer
open up stvp
open up your new firmware
click program tab (it will say couldn't read swim)
Now turn your power button on (nothing should happen (your radio should have batts in it))
Click program tab again
Your done, now unplug the radio and setup your models.
 
benoj said:
i was having the same problem as spoo76 on the family comp with 7 with it saying a problem occured and it will need to close the program so i tried it on my own comp with 7 and it didnt do it, instead the instant i hit program it says not responding but if i leave it for a min or 2 it responds and programs it fine. dam newer computers
Click to expand...

With 7 it might be a program you need to right click on and "run as administrator". I know a lot of programs that will just bump you out if you don't.
 
Hobbypartz just ran out of stock on the GT3B :shock: i guess they weren't expecting a jump in sells.
 
I looked for quite awhile, cheapest place to get them is ebay and their about $50 shipped from china :shock: There's also afew actual auctions that will probably go abit cheaper.
 
You must log in or register to reply here.

Similar threads

Greatscott
Flysky - Fail
Replies
10
Views
1K
TacoCrawler
T
jebster
Jebster's XX10 T-REX
Replies
8
Views
2K
jebster
jebster
JatoTheRipper
Vanquish VRD Stance RTR
2
Replies
33
Views
7K
Col_Sanders
Col_Sanders
G
Flysky Noble transmitter questions - trim switch operation
Replies
0
Views
1K
garyk
G
S
4WS with Spektrum DX5C frustrations
Replies
10
Views
3K
SMT_Digger
S
Back
Top