hello to everyone ;-)
I am known by the nickname Arcange, mainly on french forums (it being french lol) ,
I wanted to make on this forum which is a reference not matter my latest creation
I thank the passage David Teamneogordini Forum vintage-rc provided for me this body
sorry translation with Google ^^
I was looking for a carro having lived well, I had a stack carro hair in the idea: D this draft 1.9 scale and therefore primarily on the basis of a Scorpion AX10 and carro de Clod, chassis, wheels, carro and many others have had transferred to make room for the home made,
By point of milling, but the menu 5 / 6 hours a day job, epoxy resins, polyurethane resins, silicone RTV with agent Tyxo (drying fast and gain thickness / paste), various aluminum plate, tubes full and square shapes aluminium profiles abs, carbon fibre, fibre classical and sacred reserve elbow (especially sanding with various shims).
the idea is part of "how to extend an AX10" without changing the universal and without investing millions ^ ^, je ne accounts plus a white montages, many pieces have been modified at the last minute, the wheels on this photos are the "test", tires and some "trinkets" in the coming week ^ ^.
some photos of assembling or various stages are absent, the time to find my apn in cartons ....
therefore begin by the arrival of my new victim ^ ^
here it arrived safely, that will be enclosed in a box with a great dose of décapfour ^ ^ for him remove his robe, point of bumper / front crossbar, cracks in any genre, not even afraid not even evil ^ ^
décapage once, that it will cut its dump, a plate lexan used to close the rear of the cabin while I take the footprint with RTV silicone, my mould will be shielded with fiber and small Tear aluminium for not all that deforms the mould and especially in the mould of the first play.
while it dries ^ ^, the front cover had not suffered badly, will be "temporarily" repair, the party that holds abs hyper charge of origin will be cut up and used once carved reseal the location of this one, fibre and resin provide the appropriate supports, a smoothing intensive sinto and coated with thick will be the final solution to enable me to deal in more detail his case ^ ^, we see this a little later ...
While resin ([color = # FFFF00] me strips of cum [/ color]) dry, I put aside the party to attack carro drawing and cutting the chassis, that should be longer, scraping along the length of universal without weakening, if I can afford to hire amortos scale or at various other places and in various positions, armed with my jig saw blades and a gradual adapted for aluminium is left for frequently asked chips in the eye,
both parties will be joined together in order to break at the same time, machining the contour for the same two parts, respectively, they will be marked L & R (plus a fuss about ^ ^), crosses will be manufactured in sections of aluminium and in a plot crude for setting back of the carro, I took the form at fixing carro of origin to the location of vario LRP Ai Bullet, two crosses and a home made carbon plate for ajourée pass the crown of transmission will be a good compromise, a stroke of black temporary give the best effect, it will be repainted in black matte quality when everything is finalized.
My mold is ok, comes the phase of twinning and alignment of the two carro into a dual cab, in the genre is complicated top, this is an exercise in style ^ ^, the dump will again be set at his cabin, opening roofs and gutters will be removed, objective basic ...
I do not have a photo of the yard in court, but here after a first coat of primer provisional., crosses under the grille is cut and formed into a profile ABS
Again, time it dries lol, two plate glass will be covered with Vaseline démoulant and me used to manufacture a carbon plate of good size, one of two plates will be detonated the mould because of too much weight asked it to compress ^ ^
here is the chassis with carro in their early ^ ^, then the arrivals is not selected, all these mounts a white enable me to control the geometry of all, 5 hour over a piece yes, but the aim to obtain a satisfactory result, a milling machine would have been very useful ....
manufacture of a mold on the basis of folded sheet metal, aluminium, to leave a shoe lower, cutting small logo Axial a needle dremel, a small piece of lexan painted green for the background, and hoof Court finishing
farfouillant in my brothel, I put his hand on former damper gpm for mini T, those will be changed, eliminating resort, O-ring small section to curb a little bit more and move around unimat to eliminate the thread , Polishing finish, these amortos has used something else a little later ^ ^
I am known by the nickname Arcange, mainly on french forums (it being french lol) ,
I wanted to make on this forum which is a reference not matter my latest creation
I thank the passage David Teamneogordini Forum vintage-rc provided for me this body
sorry translation with Google ^^
I was looking for a carro having lived well, I had a stack carro hair in the idea: D this draft 1.9 scale and therefore primarily on the basis of a Scorpion AX10 and carro de Clod, chassis, wheels, carro and many others have had transferred to make room for the home made,
By point of milling, but the menu 5 / 6 hours a day job, epoxy resins, polyurethane resins, silicone RTV with agent Tyxo (drying fast and gain thickness / paste), various aluminum plate, tubes full and square shapes aluminium profiles abs, carbon fibre, fibre classical and sacred reserve elbow (especially sanding with various shims).
the idea is part of "how to extend an AX10" without changing the universal and without investing millions ^ ^, je ne accounts plus a white montages, many pieces have been modified at the last minute, the wheels on this photos are the "test", tires and some "trinkets" in the coming week ^ ^.
some photos of assembling or various stages are absent, the time to find my apn in cartons ....
therefore begin by the arrival of my new victim ^ ^
here it arrived safely, that will be enclosed in a box with a great dose of décapfour ^ ^ for him remove his robe, point of bumper / front crossbar, cracks in any genre, not even afraid not even evil ^ ^
décapage once, that it will cut its dump, a plate lexan used to close the rear of the cabin while I take the footprint with RTV silicone, my mould will be shielded with fiber and small Tear aluminium for not all that deforms the mould and especially in the mould of the first play.
while it dries ^ ^, the front cover had not suffered badly, will be "temporarily" repair, the party that holds abs hyper charge of origin will be cut up and used once carved reseal the location of this one, fibre and resin provide the appropriate supports, a smoothing intensive sinto and coated with thick will be the final solution to enable me to deal in more detail his case ^ ^, we see this a little later ...
While resin ([color = # FFFF00] me strips of cum [/ color]) dry, I put aside the party to attack carro drawing and cutting the chassis, that should be longer, scraping along the length of universal without weakening, if I can afford to hire amortos scale or at various other places and in various positions, armed with my jig saw blades and a gradual adapted for aluminium is left for frequently asked chips in the eye,
both parties will be joined together in order to break at the same time, machining the contour for the same two parts, respectively, they will be marked L & R (plus a fuss about ^ ^), crosses will be manufactured in sections of aluminium and in a plot crude for setting back of the carro, I took the form at fixing carro of origin to the location of vario LRP Ai Bullet, two crosses and a home made carbon plate for ajourée pass the crown of transmission will be a good compromise, a stroke of black temporary give the best effect, it will be repainted in black matte quality when everything is finalized.
My mold is ok, comes the phase of twinning and alignment of the two carro into a dual cab, in the genre is complicated top, this is an exercise in style ^ ^, the dump will again be set at his cabin, opening roofs and gutters will be removed, objective basic ...
I do not have a photo of the yard in court, but here after a first coat of primer provisional., crosses under the grille is cut and formed into a profile ABS
Again, time it dries lol, two plate glass will be covered with Vaseline démoulant and me used to manufacture a carbon plate of good size, one of two plates will be detonated the mould because of too much weight asked it to compress ^ ^
here is the chassis with carro in their early ^ ^, then the arrivals is not selected, all these mounts a white enable me to control the geometry of all, 5 hour over a piece yes, but the aim to obtain a satisfactory result, a milling machine would have been very useful ....
manufacture of a mold on the basis of folded sheet metal, aluminium, to leave a shoe lower, cutting small logo Axial a needle dremel, a small piece of lexan painted green for the background, and hoof Court finishing
farfouillant in my brothel, I put his hand on former damper gpm for mini T, those will be changed, eliminating resort, O-ring small section to curb a little bit more and move around unimat to eliminate the thread , Polishing finish, these amortos has used something else a little later ^ ^
