Harley's XR10 #AX50062

[Harley]

ow lucky you...bad ass servo...love my bls152, cant wait to step it up to the
ultimate Futaba HV, good work on getting them to make one 8)

I am looking forward to upgrading from the BLS152 as well. The extra 100 oz*in will be great but the speed is what I am even more excited about.

Also........ new stronger gear material!

Just in time for the weekend.

Specs:
514 oz/in and 0.11 transit time @ 7.4v

 

[run2jeepn]

Sweet Servo... It's Standard Size Correct?

 

[Harley]

Sweet Servo... It's Standard Size Correct?

Yes, standard sized case.

Same dimensions as the BLS152

 

[fa1rch1ld]

I am looking forward to upgrading from the BLS152 as well. The extra 100 oz*in will be great but the speed is what I am even more excited about.

Same..... .11 8)

I would always run my bls152 at 6.8V :shock: I loved the extra speed and
power boost...Ran smooth and cool. The new HV will be way better at the
recommended V's

 

[Harley]

Same..... .11 8)

I would always run my bls152 at 6.8V :shock: I loved the extra speed and
power boost...Ran smooth and cool. The new HV will be way better at the
recommended V's

I was guilty of running my 152 a little turned up as well, never had any issues. The new HV servos are actually completely new motors and everything too. Not just marked HV with a couple board upgrades like has been done by some others in the past.

 

[Jeepkid]

Awwwwwwwwwwww. Now I got to get a new futaba servo.
Man, how much are they going to be?

 

[Harley]

Awwwwwwwwwwww. Now I got to get a new futaba servo.
Man, how much are they going to be?

Looks like they will be about $150 at various places around the net.

 

[fa1rch1ld]

Futaba for the win....

Was watching Back to the Future the other night....Dr. Emmett Brown was using
a Futaba twin stick to controll the DMC....8)

made me like Futaba even more...lol

 

[Harley]

Futaba for the win....

Was watching Back to the Future the other night....Dr. Emmett Brown was using
a Futaba twin stick to controll the DMC....8)

made me like Futaba even more...lol

Hmmmm, he should have went a little futher into the future and grabbed a 4PK! :ror:

 

[Jeepkid]

Futaba for the win....

Was watching Back to the Future the other night....Dr. Emmett Brown was using
a Futaba twin stick to controll the DMC....8)

made me like Futaba even more...lol

I thought I was the only one that noticed that.

 

[booher26]

Awesome build thank you for all the help you have provided me with my build with out even knowing it ... one question for you is where can i find the Bigron battery mount that you have, i searched the vendor forum and nothing was coiming up for me."thumbsup"

 

[Harley]

Awesome build thank you for all the help you have provided me with my build with out even knowing it ... one question for you is where can i find the Bigron battery mount that you have, i searched the vendor forum and nothing was coiming up for me."thumbsup"

Happy to help however I can.

Here is the link to the battery mount. It wasn't in a very logical location: http://www.rccrawler.com/forum/showthread.php?t=299219

 

[Deezul]

Did you have to space out the ass end of the cab? I have the Pro with a 1/8 cab and the rear is under 3" wide with 1/2" spaces on both sides.

 

[Harley]

Did you have to space out the ass end of the cab? I have the Pro with a 1/8 cab and the rear is under 3" wide with 1/2" spaces on both sides.

You know what, I didn't check that until you said something. Looks like I need to add a little bit to hit the width.

Good heads up "thumbsup"

 

[Deezul]

no prob. I threw in some thin spacers and now am just over 3"

 

[articzap]

I think you just helped me decide on what servo I will be upgrading when my S9157 gives out from over volting.

 

[Harley]

Just got my skinz installed. I am too tired to Install the servo tonight though.

These new Freq E Skinz install on the inside of the panels for more protection and gloss.

 

[strawb]

looking really pimp!!!!

 

[Harley]

Getting ready to hit the road for KCRC Comp #2. I'll try and get some pics and video of the rig on the rocks today.

 

[ittybitty]

That'd be nice! Do work driver! "thumbsup"