Red Rockcrawler
Trying to have Fun Again
I got mine today john what are you using for packing material. I thought you sent me a diaper at first.
-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
HH Cobalt Puller- Reborn page 35!
- Thread starter JohnRobHolmes
- Start date
Lol!
It is like a diaper, I got a large item shipped with a ton of if and I am just recycling it. Very soft and absorbent. For a bed maybe?
It is like a diaper, I got a large item shipped with a ton of if and I am just recycling it. Very soft and absorbent. For a bed maybe?
Red Rockcrawler
Trying to have Fun Again
What type of large object would need that big of a diaper. Did you order your own sumo wrestler?
It depends on your gearing and rig weight. The 7t normally gets a bit warm in a 2.2, but not hot. I would suggest keeping under 160f, but it is doubtful you will get much past 110f.
hlpressley
Quarry Creeper
Yes mine gets kind of warm but not hot. (yet) :lol:
I love my 7T John, you are the man! "thumbsup"
I love my 7T John, you are the man! "thumbsup"
bigflex
I wanna be Dave
darn postal service. I am still waiting for mine. :-(
Speedyboy
Pebble Pounder
Hey JRH got my motors today... they're awesome but, I don't have any bolts that fit them. Whats the thread size on them?
Do you recommend any trick bolts or anything?
Oh and I got an 8t pinion to fit on raptor2 axles without modding them (a lil confusing since RC4WD said they fit down to 10 only)
Thanks for all your help
Do you recommend any trick bolts or anything?
Oh and I got an 8t pinion to fit on raptor2 axles without modding them (a lil confusing since RC4WD said they fit down to 10 only)
Thanks for all your help
They are 4-40 screws on the last batch.
carver
Rock Crawler
puller
Hey john, I recieved my motor today thank for the fast delivery. It's in my rig now and all I can say is that it is an amazing motor. Thanks again.
Can brushes be purchaced for the motors?
Hey john, I recieved my motor today thank for the fast delivery. It's in my rig now and all I can say is that it is an amazing motor. Thanks again.
Can brushes be purchaced for the motors?
crawler4lif3
Rock Stacker
yea i was thinking about that too. can you get them? killer motor by the way!!!!
Yes, brushes are available. I am waiting for more from the factory right now.
It's a 20t pinion 87 spur, stock on the RTR. I had alot of full throttle action and you can't hold your finger on it for more than a couple seconds,. It started to make a loud like buzz at mid-low throttle, not noticable at speed, only noticed it out of the truck. It smooths out once you punch it. I hope I didn't break it.
Last edited:
halfcab
RCC Addict
WHEN ARE YOU GOING TO HAVE SOME 10T motors available:roll:8)?
...
Don't know yet, read above statement.
It could be the brush clicking or your tranny vibrating, but it could also be the ESC acting noisy. Inspect it to make sure nothing looks burned or purple around the brushes.
halfcab
RCC Addict
thanks JRH;-), just wondering, want one:shock:, already have the 5t and 7t8), just NEED to complete the set"thumbsup"
nothing looks burned. Still copper color. Seems ok, just vibrates a little at part throttle out of the truck. Is this too much motor for an 8cell 2/3a pack? If so what nicad cells would you recommend? (FXR pro so voltage limit isnt an issue)
bigflex
I wanna be Dave
got my motors today and wow!:shock: These are a work of art! Thanks John."thumbsup"
Speedyboy
Pebble Pounder
My motor "buzzes at about 1/2 to 3/4 throttle, its done it from the start and my other motor (the front) does the same thing...
I fit these on clods:lol:
BTW if anyone else tries this I recommend motor guards, sticks and debris like to find there way in the motors.
also note nicad batteries aren't that good. I would at least get a quality NiMh
