hitec servo's

[yfz350]

will hitec warranty a servo if you cut the wires to wire it direct to the bec or am i up a river with out a paddle

 

[team3six]

yeah, probably not. I would email them and ask. is it something you can fix yourself or is it something to do with electronics?

 

[yfz350]

it got hot on my xr10 now it dont work

 

[TattooKenny]

Did you set your end points? What did you have the BEC voltage set at?

 

[yfz350]

It's at 6 volt its a 7955

 

[version_three]

With the cut wires, I wouldn't hold my breath for warranty work, but it couldn't hurt to ask.

6v on a 7955 shouldn't have been any problem though - that's what I run mine at.

 

[skid plate]

will hitec warranty a servo if you cut the wires to wire it direct to the bec or am i up a river with out a paddle

If they won't, next time run a Y-connector, and protect your warranty.

There are several places on here that explain how to wire it properly.

Shouldn't really ever have to cut wiring on the servo's, ESC's, etc., if warranties are going to be in check.




JC
8)

 

[Erik D_lux]

I cut my servos wires to reduce length and Hitec took care of me. Hitec has been nothing but good to me.

 

[SwampDawg]

i just picked up male to female adapters, this way you can just plug the one end into the Rx and the other into the servo. Now...if you need to cut anything - cut the adapter not the servo wires."thumbsup"

 

[Rig Rocker]

I run a Y to.

Its the best way and you won't have to worry about warranty issues

They only have a 1 yr warranty so make the recpt less than yr ago

If they won't, next time run a Y-connector, and protect your warranty.

There are several places on here that explain how to wire it properly.

Shouldn't really ever have to cut wiring on the servo's, ESC's, etc., if warranties are going to be in check.




JC
8)

 

[yfz350]

i just bought it oct 8th so its new it was on my xr10

 

[losichris]

I always shorten or Y my servo wires and they have always taken care of me... Every time though they say one time only lol

 

[Rockcrawler]

I cut my servos wires to reduce length and Hitec took care of me. Hitec has been nothing but good to me.

X2

I have always had great customer service from Hitec. "thumbsup"