Lets see your "Work Shop/Room"

[ColquittCustom405]

Ever look at the pictures of all the RC's in work and see something in the background?I don't know if this thread will last, but I was just curious of what your garage,work shop (where you build) looked like? Is it dirty? Clean? Here's mine, I've got a decent work spot.

 

[Mnster]

This is part of my work area. :mrgreen:

 

[SlammedMini469]

i am sitting at mine.....

is my computer desk, i have a 12" x 22" area to work....have to pull the wheels off the nylint to work on it :lol:

 

[run2jeepn]

Well here is mine. I was going to do this a long time ago, but never did. Oh well I did it now.

Here is my old tool box I repainted.

 

[mp3ranger]

More photos here


Here is my work area (spare bedroom) This were I spend most of my time away from the wife.

My work shop

This my new work area I have been working on . It is right be side the work shop. I need to stop spending so much money on rc stuff so I can finsh up my work area.

 

[1BadJeepBruiser]

Working like a slob ^^^

Working not like a slob :lol:

I have the basics in the basement. I have a Hudy motor lathe with diamond bit, motor stand/timing jig with cooling fan, 2 power supplies, 3 chargers, a battery cooler, deans discharger with cut off, 3 rd hand, really nice CSI soldering station, battery jig etc

We have a HUGE detached garage that houses: 1 odyssey, 1 100th anniversay harley ultra classic, my moms hondamatic, my step fathers foreman, a ford ranger, my step fathers super duty, h1 and lots of other stuff although I dont really have any pics:x

The garage is pretty freakin big, not as big as unimogers but it does fir Monster Mash in it and the mash has 49" irocks on it :shock:

Mike

 

[xjman]

That Furd = Huge

 

[hotrodzach]

no pictures, but i hijacked my mom's picnic table in our garage and have it loaded with everything i need to work, plus 2 plastic carts full of batteries and chargers, a cart with the stereo, an old desk with my airbrush station, and a huge chest full of my little rc toys.

I take up easily a quarter of the garage, but my parents don't mind cause im outside doing something productive with my time and not inside watching tv or something.
-Dalton

 

[Unimoger]

here is my 16' RC workbench, it is a small part of my 2500 sq ft shop.:lol:

and the 1:1's in the shop are my 416 doka unimog, swiss troop unimog, 67' swb 2wd chevy show truck, 51' 5 window chevy truck, 54' chevy5 window, 31' model a rat rod, 38' austin bantam rat rod, 2002 WCC CFL chopper built by Jesse James and my first car ever, 74' chevy k5 full top blazer.

http://www.nor-calrcrc.com/albums/album25/aaa.jpg

 

[Double J]

this is where I do most of my cut, brazing, drilling and well you know (besides the dinning room table). I get to use the whole grage but this is where most is done. The garage is a nice 2 car with extra space.
I added the parts in the pic sunday so I can get more organized. Now I just need to add more shelves and organize the tools that will be on the wall. (I took all those off)

 

[cheapjeep2]

Been done before a while back....


http://www.rccrawler.com/forum/showthread.php?t=12425

 

[Unimoger]

Been done before a while back....


http://www.rccrawler.com/forum/showthread.php?t=12425

yeah, but is always fun to drag your junk out again.:lol:

 

[xjman]

After looking at some of those shops I have realized one thing, some of you have WAY too much money.... well did untill you built the shop..

 

[braceysdad]

Mine

 

[braceysdad]

Yo Unimog, are those your rat rods? I have a 1954 chevy truck I post up tomorrow

 

[TLTCrawlin]

Unimoger, nice chopper, my dads workin on a old one, 70s! Ahmen (sp?) frame, CB750, good rake etc, its going to be fun for me to drive, lol its going to cost udner a grand too! We also have a mini 185 chopper, it would fly if it had wings!!

 

[peej410]

they are jalopys not ratrods!!!!!!!!!

Yo Unimog, are those your rat rods? I have a 1954 chevy truck I post up tomorrow

 

[braceysdad]

This is in the other corner of my shop. Dirk requested that I installed these!

 

[Double J]

I like the organization of most of the shops on here.
except for the forbidden corner of bracesdads. I'd just hate to see how you guys really act around each other. Again I don't think we need to know that either.

 

[dezfan]

Wow! I really envy some of the beautiful work spaces.

I make due w/ what I have available to me. Moving from a two car garage full of tools and have lots of storage and bench space to a single wall of a two bedroom apartment takes some getting used to!:lol:

But that's what happens when you get married and move across the country to live w/ your Wife and son.:shock:

I'm slowly getting some of my tools back, (only in miniature this time) I picked up a 3 inch variable speed bench grinder w/ a rotary tool attachment on e-bay for $30.00 and my wife and son bought me a mini drill press for my birthday. So far I'm pretty happy w/ them. I want a small chop saw and band saw. COME ON CHRISTMAS!:twisted:


Anyways here is my work area in all it's glory!:lol: