-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
Looking for 9t 48p pinions WE CAN GET THEM!!! SEE INSIDE
- Thread starter ccampb04
- Start date
Mad Scientist
RCC Addict
I think 12t is as small as you can get in 48p.
speedsport22
Pebble Pounder
rockwerks said:
What he said. It just wont work.
HannibalLecter
Quarry Creeper
ccampb04 said:
The picture shows it - it won't work :roll:
What type of set up do you have, maybe there is something else that can be done to reduce your ratio. What motor and tranny are you using?
HannibalLecter said:
:lol:
Not really much left to debate, is there? :lol:
HannibalLecter
Quarry Creeper
I'm sorry JIA - I couldn't help but laugh when I saw your picture above :mrgreen:
Maybe if he'd drill it out a bit and get a BFH.......nope still wouldn't work.;-)
Maybe if he'd drill it out a bit and get a BFH.......nope still wouldn't work.;-)
just knock a few teeth off a 12 tooth!
HannibalLecter
Quarry Creeper
johnrobholmes said:
LMFAO!!!!!!
Heck- if you cut every other one off you'd have a 6T :lol:
That red X looks like a 4 tooth. :lol:
I'll upload the image.
If you read the URL these are for a micro Street Force which uses motors with a 2mm shaft.
http://www2.towerhobbies.com/cgi-bin/WTI0095P?FVSEARCH=dtxc8356&FVPROFIL=++
I'll upload the image.
If you read the URL these are for a micro Street Force which uses motors with a 2mm shaft.
http://www2.towerhobbies.com/cgi-bin/WTI0095P?FVSEARCH=dtxc8356&FVPROFIL=++
Attachments
Last edited:
bigred
Rock Crawler
Even with a 2mm shaft there not much material left...
This thread should of ended with JIA first post.........
This thread should of ended with JIA first post.........
Last edited:
HannibalLecter
Quarry Creeper
oIIIIIo said:
It might be outside the box ----- but it still aint goin IN the crawler :lol:
What is the pitch on the red X, looks like a 90 pitch
The lowest 48 pitch tooth pinion gear I know of is a 10 tooth, I am selling my last one to chino and the other one is in my Boyer bronco that is on the bay. These pinions were made by Radical Midwest Chassis Designs. JIA I am sure you remember them from the rcmt.net days ;-) . These pinions were actually made for him by RRP (Robinson Racing Pinions).
MIke
MIke
Maybe if we get a large enough order we can get RRP to make them again...HMMMM
Mike
Mike
cartronicshn
I wanna be Dave
i'll take 3
1badjeepbruiser said:
Man...Doc Wildman!
Forgot all about him! :lol:
Sorry, but with all due respect, I hate to see peeps with the wrong info or or worse pass it on. RRP is Robinson Racing Products.1badjeepbruiser said:
Its not really a big deal, but I have found it to bother me much more since I have been working at my LHS. :roll: Peeps constantly coming in and giving wrong companies and getting terms mixed up, even passing on terrible info to other customers. So now I make it in my best efforts to correct them, so they dont develop bad habbits, or pass along foul info (not that getting a name wrong is terribly wrong, :wink
.Jason
