Losi micro high roller

[justbrockinit]

I was wondering if any of you knew if you could fit 1.0 wheels and tires on a high roller? what about orlandoo hunter whell and tires? also curious if you knew of anybody that still has some of the gpm aluminum hop up parts?

 

[Brake Weight]

Cheap fleaBay, AsiaTees, and maybe Amain for the hop ups.

As for fitting different wheels it's not that easy. The front wheels on the H.Roller aren't a hex or pin, they're pressed in bearings that the shaft slides into. Just like the Losi Mini.

 

[justbrockinit]

Cheap fleaBay, AsiaTees, and maybe Amain for the hop ups.

As for fitting different wheels it's not that easy. The front wheels on the H.Roller aren't a hex or pin, they're pressed in bearings that the shaft slides into. Just like the Losi Mini.

haven't seen any on eBay yet, asiatees is out of stock along with the gpm site, where I found them, I have emailed asiastees about when they will be back in stock but I think they are discontinued. thanks for the info about the wheels I was confused about how they worked, this is my first losi rc and micro....are theback held on with a little c clip? do you know if orlandootires fit on the stock wheels, and what are some of my other options? theres some black chrome ones on ebay I've been eyeing up

 

[Brake Weight]

Those black chrome will fit. They're for the Micro DT and are a little smaller. There are a set of axles that have a small plastic but instead of the E clip that's a lot easier to deal with. The Orlandoo tires wont be wide enough for the wheels.

 

[Brake Weight]

The best bet would be to buy a Losi Micro already hopped up and either use it as a parts donor or use it.

 

[twomicros]

here's a little project that I did with my micro high roller: http://www.rccrawler.com/forum/micro-scale-rigs/581555-micro-highroller-79-ford-explorer.html

they way that I made 1.0 tires work was by getting a set of micro DT wheels/tires and just gluing them into the 1.0 wheels. check towards the bottom of my post and you can see what I mean. they're not perfect but if you're not looking from super close it's pretty good.

 

[Brake Weight]

The cheap foam grips for a bicycle handlebar makes good indoor hard surface drift tires.

All I could find before I gave up were yellow.