Menifee-Temecula area crawlers

[Cpt Nemo]

Toy hauler cool man , we have a place to sleep now, I bet nemo snores like crazy and the 2nd night everybody sleeps outside.
I think ill borrow my friends tent trailer to go out with, ill just need somebody to haul it there and back...lol

Yep!
I can tow that trailer for ya"thumbsup"

 

[Cpt Nemo]

Cant borrow my friends RV for the KOH.
He will be out at Gordens that weekend.

 

[Cpt Nemo]

So this weekend
-Wraiths & Abortion Wronchos at Rainbow?
-How about some XXX, EXO & Slash Bash at Snickles Bridge?

 

[JDCrawler27]

JD
My Wratingo
SCX10 Skid
4-Linked
Upper Links Straight
Lower Links Angled 15mm Balls


nemo nothing rubs at full compreshion? what are all the specs of that thing?? if i were to do the same set up but longer links for a differnt body would it end up rubbing?

 

[Cpt Nemo]

JD
My Wratingo
SCX10 Skid
4-Linked
Upper Links Straight
Lower Links Angled 15mm Balls


nemo nothing rubs at full compreshion? what are all the specs of that thing?? if i were to do the same set up but longer links for a differnt body would it end up rubbing?

Nope Nothing Rubs.
You have to do the links like this due to Drive Shaft clearance.
I am running Pro-Line scaler shocks if you try to go higher the Driveshaft CV joints bind then you have to rotate the axles for clearance witch is OK for the rear but in the front you would have to rotate the knuckles back also or your steering goes to poop.
-Ickabob is running a longer wheelbase on his. mine was kept short for the Dingo body
-Also running Low-Pro 2.2 Flat Irons If I installed Ripsaws or TSL I would have to remove the fender flairs and trim the body,
-So all things are possible.
-My Wheelbase is 295mm (11 1/2")

 

[JDCrawler27]

im looking at geeting just rails and puting the wraith skid with wraith trans and the links i curently have,, i think this will work even if i need to widen the hole chassis,, im trying to do a full size build i think im going to go with a hard body also

 

[Cpt Nemo]

im looking at geeting just rails and puting the wraith skid with wraith trans and the links i curently have,, i think this will work even if i need to widen the hole chassis,, im trying to do a full size build i think im going to go with a hard body also

Yep that will work have to trim the Wraith skid and drill new holes also have to make crossmembers to keep the Wraith skid width or bend the frame rails in to use the stock SCX10 braces.
My Black Comanche uses a TCS X-Trail frame with a HotRacing trans skid. It is wider than the SCX10.
-I used round thread tubes from Axial for the cross braces

 

[ickabob]

and is that a scx10 skid and trans? or wraith skid with scx10 trans??

iv read almost every wroncho build thread and cant get good info from anyone really, its like they are talking in code, what is all this mm shit haha dont you people know we are in america we use the standard system lol

Yeah I don't know the codes here but I can make one up for you if you want?:lmao:

 

[442]

fiqures the only rig I'm interested in nobody took a real pic of ,,,,,

that 4x4 Winnabago looks cool

 

[ickabob]

im looking at geeting just rails and puting the wraith skid with wraith trans and the links i curently have,, i think this will work even if i need to widen the hole chassis,, im trying to do a full size build i think im going to go with a hard body also

I was going to use the wraith skid but it limits the ease of using other body's so mine has the scx skid plat.
But then you need 3 axr400 and 5 axc674 to really get the 84mm to fit in the -45* slot. I hope that helps you"thumbsup"

 

[ickabob]

fiqures the only rig I'm interested in nobody took a real pic of ,,,,,

that 4x4 Winnabago looks cool

I can see you driving one right now"thumbsup" ill see if I can get the owner the send some pictures"thumbsup"

 

[442]

danka

 

[Cpt Nemo]

Cow Farts!
Good Night

 

[ickabob]

Cow Farts!
Good Night

Man don't g o to bed before the Nancy's show there faces here, you know hopper was at home combing his lawn on Saturday and Rockin Gayth was at Gaymis being a sand sucker.:lmao:

 

[RC-Hopper]

Man don't g o to bed before the Nancy's show there faces here, you know hopper was at home combing his lawn on Saturday and Rockin Gayth was at Gaymis being a sand sucker.:lmao:

I wasn't combing the lawn! I was reorganizing my recipe books:mrgreen:

 

[ickabob]

I wasn't combing the lawn! I was reorganizing my recipe books:mrgreen:

Well that's a good thing, lol dang you missed a good time, nemo had a smile on all day, kinda looked like this

 

[RC-Hopper]

Well that's a good thing, lol dang you missed a good time, nemo had a smile on all day, kinda looked like this

Really was working on a bid for work, spent all day on it again today, still not completely:evil: done.

 

[5VoltDetonator]

fiqures the only rig I'm interested in nobody took a real pic of ,,,,,

that 4x4 Winnabago looks cool

I also saw that motorhome in the background and wanted to see more- I tracked it down and here it is, I think?- http://www.rccrawler.com/forum/1-9-scale-rigs/135624-motorhome-scale-build.html

 

[snicklefritz]

So this weekend
-Wraiths & Abortion Wronchos at Rainbow?
-How about some XXX, EXO & Slash Bash at Snickles Bridge?

Sounds good for Sunday! Saturday is my anniversary (11 years) so I know that's not happening.

fiqures the only rig I'm interested in nobody took a real pic of ,,,,,

that 4x4 Winnabago looks cool

I'm such a tool. I looked that over real good but was too lazy to get my camera out. There were some other cool, custum rigs too that I didn't capture pics of. :roll:

 

[Bronco Bobby]

Hey snickle you don't want to spend your anniversary under a bridge like "old times?"