mojave II 2 door cab with 4 door bed?

[c0bra]

I have an idea of a build im going to be working on soon, which is shortening a mojave body down to a 10.2 inch wheelbase. Ive seen some drift cars that run the body with the same wheelbase, and based off of what i saw in those pictures it looks like the bed was about as long as the 4 door version.

So if anybody happens to have a mojave 2 door cab and 4 door bed, can you possibly set them together to see if the body lines will line up, and possibly check to see what the wheelbase would be?

 

[Perkul8r]

This was at the beginning of my Shorty project, the bed was from my LWB Kit, just bolted straight onto the Mojave cab.

This was right around a 10 inch wheelbase if I remember right.

 

[c0bra]

Thanks! If that’s on a swb chassis, it looks like I might be able to get away with using it but it’s going to be really close.

I ordered a complete normal tf2 body yesterday and may still pick up just the 4 door cab.


Sent from my iPhone using Tapatalk

 

[Perkul8r]

The SWB chassis wont work. I found that out the hard way lol. On Rc4wd's website it says the wheelbase is 9.9 inches. However, it says its like 242 mm, which is actually 9.5 inches. I had to extend the SWB chassis to work with this body.

I ended up filling the gaps in between the bed and cab to make it look like one. I sure do miss this truck. I want to build another one this winter.

 

[realsickclown]

so let me make sure I am understanding this correctly. you take the SWB tf2 , mount a cab and use the shorter bed from the LWB. and Make a lil shorty P/U.. I am liking the looks.