New SSD 2.2 Proline Rings for SSD wheels

[SSD]

Allow Proline 2.2 tires to be fitted to SSD 2.2 steel wheels (SSD00019 & SSD00025) and SSD 2.2 Assassin wheels (SSD00029 & SSD00045)

2.2 Proline Tire Compatibility Rings

 

[2JSC]

YAY! I was hoping these would become a thing!!!

 

[tjohanne]

wow! Will there be a 1.9 version as well?

Sent from my Nexus 10 using Tapatalk

 

[rngrchad]

SSD is no doubt becoming my go to, favorite RC parts mfg'er. You guys make great products. Every single thing I own of yours is perfect.

 

[SSD]

wow! Will there be a 1.9 version as well?

Sent from my Nexus 10 using Tapatalk

All of our 1.9 wheels are already Proline tire compatible so no need for rings.

 

[tjohanne]

All of our 1.9 wheels are already Proline tire compatible so no need for rings.

I see. Thanks for the info. I found prolines harder to mount, but I blame the tires and not the wheels. I have been exceptionally happy with all my SSD purchases

Sent from my Nexus 10 using Tapatalk

 

[robojunkie]

is this going to happen for the rock racers too? I'd rather not modify them if I can help it. What's the difference between these and the stock ring.

 

[2JSC]

YAY! I was hoping these would become a thing!!!

I've got a set on my 2.2 10-holes. Tires mounted up sooo easy. "thumbsup"

 

[SSD]

is this going to happen for the rock racers too? I'd rather not modify them if I can help it. What's the difference between these and the stock ring.

Yes we plan to make some for the SSD Rock Racer wheels also.

Proline tire beads are just different dimensions from all other brands.
So these rings are designed to hold Proline beads. So the width and OD are different.

 

[just a sami guy]

Hey do u like the ssd 10 holes I'm looking st the same wheels for my wraith

 

[2JSC]

Hey do u like the ssd 10 holes I'm looking st the same wheels for my wraith

LOVE them... just be sure to pick up a nice 2mm nut driver from Locked-Up RC to tighten up all the scale hardware. "thumbsup"

 

[Natedog]

Hey do u like the ssd 10 holes I'm looking st the same wheels for my wraith

I like mine. "thumbsup"

LOVE them... just be sure to pick up a nice 2mm nut driver from Locked-Up RC to tighten up all the scale hardware. "thumbsup"

X2 "thumbsup"

 

[Pabust]

All of our 1.9 wheels are already Proline tire compatible so no need for rings.

I have some steel Trail 1.9's and a set of 1.9 Proline tires and it's impossible for me to mount them on this wheels, is there a special procedure for doing this?

 

[SSD]

Are they XL tires? If so they are not the same as other PL tires beads.
There is no special procedure. a few longer screws help to get started though. Then you can switch them out for the shorter screws after thou have a few installed.

 

[just a sami guy]

Hey I just got a set of the 10 holes and putting a set of pit bulls on them and do I need the black ring or should I take it out thanks

 

[rngrchad]

Absolutely loving my SSD steelies; just mounted up some proline tsl xl's tonight with the SSD Proline Compatibility ring. No problems at all! This is my 2nd set of ssd wheels and I plan on getting a third soon. "thumbsup"

 

[just a sami guy]

I'm just having a hard time putting them together and getting the bead to stay

 

[dpcardoza]

Couple of questions. Are these wider than standard internal rings? Also curious if they theoretically should work with any 2.2 3 piece wheel.


Sent from my iPhone using Tapatalk

 

[JatoTheRipper]

I wish you'd offer a Proline setup that way we don't have to buy the set of wheels and rings only to not use the standard rings.

 

[SSD]

It's funny you should say that...