-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
NIRC. Chit Chat
- Thread starter sally1800
- Start date
whats that saying?, "dont lose sight of the moon counting the stars."
hera is cool. but melons is proven. you know what to do to it and what it needs. its solid and it works. i'd go for steel spools and super300's. make it bulletproof.
hera is your next hassle and moneypit.
"thumbsup"
BTW does anybody want to trade a 2.2 proline tsl for an extra 1.9 rc4wd bogger? i hate to order another pair of tsl's just to have one spare...
hera is cool. but melons is proven. you know what to do to it and what it needs. its solid and it works. i'd go for steel spools and super300's. make it bulletproof.
hera is your next hassle and moneypit.
"thumbsup"
BTW does anybody want to trade a 2.2 proline tsl for an extra 1.9 rc4wd bogger? i hate to order another pair of tsl's just to have one spare...
I've yet to have an issue with the Axial CVDs + gunnar pins. I do agree about the steel spools though; I used a set from FLM but they tend to be hard to get ahold of.
Maybe getting rid of the Summit tranny on Buxom might shed the extra weight that is *may* be causing issues with it.
Maybe getting rid of the Summit tranny on Buxom might shed the extra weight that is *may* be causing issues with it.
I have busted Axial cracked the shaft off. Neil has also. They work but not the best plan. MIP is much stonger.
I can get FLM. I know Jamie he is the owner. Let me know if you want to go that route. If he still makes them.
300's are the best.
Mega Fattie
Quarry Creeper
I need some no-slop lockers for my AR-60's!
And some 1/4" stainless steering links!
Maybe some cool stainless diff covers?
What about low CG axial scx10 trans plate out of steel or stainless?
Last edited:
johnnyh66
Scale Detail Engineering
An adjustable Tie Rod for the Wraith.
I'm going to make one from Threaded Rod but I won't be able to sleeve it because of the bends around the pumpkins.
I'm going to make one from Threaded Rod but I won't be able to sleeve it because of the bends around the pumpkins.
u would think i would know that... i got em f&r in my c2.
if ya make a tranny plate make it derin, much slippier.
you could make a divorced engine/tranny mount like the one on my c2 zuk.
of course you can, threaded rod thru sleeve, then bend.
u would think i would know that... i got em f&r in my c2.
if ya make a tranny plate make it derin, much slippier.
you could make a divorced engine/tranny mount like the one on my c2 zuk.
johnnyh66
Scale Detail Engineering
CVDs, not driveshafts.I've got MIP driveshafts in both the C2 and Wraith.
MIP did make AX/SCX10 CVD's. I was running them in Melons till a bearing got stuck on them.
johnnyh66
Scale Detail Engineering
I guess I could use aluminum... I have Stainless on Melons.
Die-Laughing
RCC Addict
Mega Fattie is going to need some steering links made up so, I can make some extras if you guys want. I used 1/4" solid stainless to make the links on all of our trucks. I can do M3 or M4 tapped holes.
Just let me know how long you want them and ill give them to ya straight and you guys can bend them.
Just let me know how long you want them and ill give them to ya straight and you guys can bend them.
Mega Fattie
Quarry Creeper
Sweet! 3 day weekend again this weekend, and my shiz from rpp will hopefully be here before this weekend too.
Pattern it on wood, make your total length measurement, sleeve it then make the bends, that is how I do it.
I would love to get a set for my wraith, the delrin ones I did with the compound curves drive me crazy. Any idea of cost?
And the builds are now officially out of control, on top of finishing my 2 hilux's and working on the chassis for my 6X6, rebuilding the drive train and rear end on my Wraith, I have now taken on a custom Fat Strat guitar build. Bidding on a couple "chassis" as I type. Electronics are all worked out. Funny, the electronic are actually cheaper than an nice crawler's electronics. Now the chassis is a great deal more.
At least the Taco steering is all redone and I do have another 8 or 9 guitars to play while I am building this one.
At least the Taco steering is all redone and I do have another 8 or 9 guitars to play while I am building this one.
johnnyh66
Scale Detail Engineering
I think it's time to start an IL "Builds" thread "thumbsup"
Hells yeah