Chumley54
Pebble Pounder
Still mulling the idea...Will contact when decided..I have a spare set of connectors, so it is a possibility.
-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
No Brainer BEC
- Thread starter heyok
- Start date
heyok
I wanna be Dave
Sounds good. Send me a PM when you are ready.
kingfuzz
Quarry Creeper
These are legit! I seem to have lost my soldering iron somehow, and am currently building a new scx10 right now and need a bec. Plus i always here about your products. I guess it is time to try them out!
Johan_Eriksson
Quarry Creeper
Can you do a 7.4v with traxxas plug insteed and ship to sweden?
Skickat från min iPhone med Tapatalk
Skickat från min iPhone med Tapatalk
heyok
I wanna be Dave
Killerbyrd14
Rock Stacker
Please correct me if I'm wrong, which I probably am, but couldn't you just use a receiver battery and have the same plug and play feature?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
heyok
I wanna be Dave
That sounds very different to me. Now you have to carry around an extra set of batteries, and you how are you addressing the issue of powering the receiver at one voltage vs powering the servo at another?
heyok
I wanna be Dave
Yes, all the parts I make are still available. Send me a PM if I can get you something.
Thanks,
Al
heyok
I wanna be Dave
Yes. I believe I have only installed blue pots on these parts.
I think you posted this picture earlier:
You can just make out the adjuster (brass coloured screwdriver slot) on the blue block in the bottom right area.
Connect a voltmeter to the red and black wires on one of the output connectors to read the output voltage.
Just got the dual Bec for my R1. Works perfectly, I would suggest lengthening the battery leads, not a problem in my cramped space but could be troublesome in other rigs.
Question, what voltage is it set at out of the box? I didn't even think to check
Sent from my SM-G930V using Tapatalk
Question, what voltage is it set at out of the box? I didn't even think to check
Sent from my SM-G930V using Tapatalk
heyok
I wanna be Dave
Hi,
Thank you for the feedback.
I agree the wire length might be too short for some. Others don't want to deal with the extra length.
I preset the output voltage to six volts before I ship them unless a different voltage is requested from the buyer.
Thanks,
Al
