• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

Post all your Suzuki Samurai's!!!!

I should build a scale version
picture.php
picture.php
 
Here is my samurai (building a plethera of parts for my return to America) I am going to make a body off of my my newly bought scaler:
0404091402.jpg

And then A scaler of my Jimny here in Japan:
100_4832.jpg
 
When I first brought it home
DCP_0986.jpg


Midway into the build
DSC_0763.jpg


Gettin ready to hit the trails in Moab (2 years after I bought it)
DSC_1325.jpg


Trail in Grand Junction...Billings Canyon
DSC_1225.jpg


DSC_1106.jpg


Oops...I mean here you can see what's underneath it...
DSC00804.jpg


Specs:
88.5 Sammy @ 100" WB
1.3L Stock Carb'd Motor
Stock Tranny
Stock Tcase w/ 6.5:1 gearing and twin sticked mounted in ZOR Snatch
2" Exhaust
'85 Yota Front w/ ARB, High Pinion 3rd, 5.29's (cryo and heat treated), Longfield shafts and hub gears with IFS hubs and brakes
'91 Yota Rear w/ Yota e-locker, cyro treated side gears, 5.29's (cryo and heat treated), stock shafts, '85 disk brake conversion
YJ spring over...custom frame mounts to keep everything as low as possible
1.5" DOM cage...seat cradle and gussets are HREW
15x8" 2.5BS Black Steelies
37x12.5 Super Swamper SSR's (they were on my jeep before I tore it down for its build)
x8000 winch with synthetic line
 
Last edited:
They only barely rub at full lock...there's not much room to move them on the front axle...
 
I stand corrected then. Reckon it'd be wheel back spacin. I am gettin ready to put yota's under mine.

Yeah I've got the 2.5BS wheels...which is good and bad. I can't convert mine to beadlocks (reversed wheels). The biggest thing is running the IFS hubs and IFS rear axle to gain the track width. I'm not a fan of wheel spacers...they add a lot of stress to wheel bearings, ball joints...etc.
 
yea mine are 85's that I have ready, My dad was nice enough while I am stuck here to put the rear spool in and front locker. I gotta send him the disc brake conversion as he took the dust shields off since he was in the axle for me. That and Find some six lug rims before I get back. I was thinkin of takin my 39's off my GMC wheels and all and just buy some stockers for the GMC seein how that would be cheaper "thumbsup"
 
Here's my 87 tin top.....
DSC01114.jpg

Not a lot done to it yet. I did find a old rear seat and had it redone (my kids love this thing). Gotta get rid of those dang vampire fang shackles(bought it that way). Im right in the middle of trying to buy a house, so parts for the Sammi are on hold for a bit (plus I already have my Ranger and Explorer for wheeling)."thumbsup"
 
Back
Top