Post pics of your 2.2 Comp rigs and specs!

[MR.VERTICAL]

 

[sococrawler]

my updated (new body) comp rig
swx bender
ax axles
r2 dig tranny
mayhems wrapped in rovers ss/f s/r
tekin w/45 hw
7955 st/645 dig
spek dx3s
losi 4"
1500 3s lipo8)

View attachment 100473

 

[catpwred]

ax 10 with my chassis
tekein 35 trun fxr
bec with jr big boy servo
3 cell lipo 30c
mips, hardin gears
pro line rims with either rovers or rock grabbers dependin on heavy i need my rig, my own foam creation in the tires and weight setup, stock ax shocks with my secret setup.
i think thats it"thumbsup"

 

[catpwred]

here's my new rig, hot racing moa's with cut down berg axles.clocked axles at about 25 degrees. hot racing wheels with rovers white's. narrowed axial chassis with customed delrin skid plate and and upper 4 links. 7mm st racing lower links 30% bend. hobbico steering servo layied down with custom plate. twin tekien speed controls, bec, twin integey 55 turn training motors with 15 tooth gears. and a proline bug body painted cat yellow i think thats about it."thumbsup"

 

[fernando]

c-10

Can't go wrong with a chevy"thumbsup"

 

[MR.VERTICAL]

Citer parma comp body

 

[h8z2luze]

Losi Comp Crawler
Sidewinder
23Turn Titan 12T pinion
CC BEC
CS170 steering servo
Hitec 225MG Dig servo
White rovers/PL Stage 2 foams

 

[rckjeep]

3 year old "Mugsy" chassis by DP Fab, Truely one of the first competitive tube chassis'd comp rigs.
TLT axles, stealth trans, 4 link, no dig, 45t lathe, rooster crawler

 

[catpwred]

ok finaly got some pic of the losi here's what it gots.

lrp 21.5 brushless crawler system
1250 20c 3cells
bec
hobbico steer servo
losi dig servo
hb rovers on hr rims
dx3r
proline bug body

 

[SaxtonSlaughter]

.

Berg Axles - Clocked F20* R30*
Chassis - CDW
Upper & Lower Links - Lunsford Titanium
Shocks - Integy 98mil Internal springs
Power - Hyperion G3 VX 3S 1800mah 35c Lipo
ESC - CC Sidewinder CC BEC 6.0V
Dig - Custom made
Motors - Holmes Hobbies 45T Hand Wound - Pinions F13 / R12
RX - Spektrum SR3100 - DSM2 - Radio - DX3S
Steering Servo - Futaba S9157 425oz
Wheels- Vanquish SLW Os 225
Tires - Hot Bodies - Rovers - Foams Ace Donuts F / B
Body - Crowd Pleazer
You can see some of my other rigs in my photo albums"thumbsup"View attachment 110384

 

[909cwler]

upgrades coming soon

vanquish products chassis
motoman's hand wound 35t motor
strc orange aluminum upgrades & droop set up
hotbodies rovers w/ sectioned out memory foam
rooster esc
dna dig
hitec titanium servo
rcp high steer knuckles and aluminum c's
axial cvd's

might step into the losi or berg world

 

[Jrob]

was a rtr ax10

ax10 chassis
stainless steel tranny
Novak Rooster crawler Esc
Axial 55t motor
Integy Drivelines
HotRacing Dig

Proline Chissels
Hitec 645 servo
Losi crawler shocks
integy upper links
axial hi clearence lower links
And Still Under construction!!!

 

[MR.VERTICAL]

 

[MR.VERTICAL]

 

[MAXIMUS-05RAVEN]

Goat 2s 18.5 13t pinion
1650mah lipo bat.
Steering-7955TG
Dig-225MG
RCBros dig mount
Futaba 3pmx
HB Rovers
Proline 8 shooters
Night Crawler LEDs
DMG tube chassis

 

[the chase 8000]

Nice truck!"thumbsup"

 

[MR.VERTICAL]

 

[motorman]

my back up rig-
akrcc test chassis
axial axles/trany/front shox
jr tx/rx/8711servo
upgraded metal trany gears
hr-spur
novak rcrawler w/ 55t
integy drives
smc bent links all around
integy rims/puttytats/pl-body
trax-upper links
rc4wd rear lockouts/front c hubs/ knuckles/rear shox
2=1000mah 2s lipo parl.
everything mounted on the front-esc,servo,lipox2

What is that sticking out the back??

 

[ecrcsquared]

Lcc

Goat 2s 18.5 13t pinion
1650mah lipo bat.
Steering-7955TG
Dig-225MG
RCBros dig mount
Futaba 3pmx
HB Rovers
Proline 8 shooters
Night Crawler LEDs
DMG tube chassis

 

[shelby]