SCX10 Picture Archive - No talking

[greggreg2011]

still has a way to go yet but just finished paint a couple hrs ago

dingo kit
rc4wd elects n flysky 2.4
pl titus and dc mud county 1.9
pactra cobalt blue and aqua wave 2 tone

[URL=http://s1193.photobucket.com/user/greggreg2011/media/dingopaint010.jpg.html][/URL]

 

[Mud bogger]

My two, the honcho is running a evx with a fan, motor depends on mood so anything from stock to 85 turn The jeep is running a axial AE-2 esc same motor choices

 

[racin707]

From phone, spelling is phones fault

 

[Quiel]

Here is my new Axial SCX10 Jeep Unlimited Rubicon kit version. It's a work in progress.

Holmes Hobbies BRXL Waterprooof
Holmes Hobbies Tourquemaster 27T
Hitec waterproof servo
Futaba receiver
Robinson racing gears in the tranny and slipper
Upgraded 4 link front and back with aluminum solid links
MIP shafts
RC4WD Dick Cepek Beadlock wheels
3Racing winch
Tough Armor Rock rails
10 piece LED lights
Moved the battery to front and receiver box / ESC to back
Umbrella soft top when the hard top is not in used.
More scale accessories to add on later.

Here is a video link too.
Axial SCX10 Jeep Wrangler Unlimited Rubicon Kit Version Backyard Bashing 1 with GoPro Hero 2.mp4 - YouTube

Location: My backyard

 

[Blake442]

Started with a RTR Honcho and shortened up the wheelbase with the extra links that come with it.
Pro-Line '80 Blazer body, painted to look like the 1:1 '85 I had about 10 years ago.
I made head and tail lite buckets and cut the window down to reach the switch taped to the underside of the roof.
Made some lunch-meat tub wheelwells and hit them with some undercoating I had around.
I got an extra receiver box with the intention of using it but instead trimmed, painted it silver and put it between the rear rails to look like a gas tank.
All that's left is to move the front bumper up a bit to match the body...

 

[spamwell]

just made a soft top

 

[sic1to]

Scx10...
Castle sidewinder
35t rockstar
CC bec
Hobbico cs170 servo
GH HD horn
HD underdrives rear
HD front
VP lockers
Titanium rear shafts
Axial universal fronts
MIP's
RRP tranny gears
Alum Axial links/steering,(strc)lockouts,chubs,knuckles
Gmade transition shocks (droop)
Gmade 10mm wheel wideners
Rc4wd sliders,f/r bumpers
Front alum shock towers
Reversed tranny mod
Custom battery tray
Custom relocation rear shocks (A setup)
Custom lift
XJ body
2.2 upgrade
Swampers/rocksters beadlocks

This is part of our rock garden in TN.
You can see the size of them if u find the xj...

 

[sic1to]

:twisted:Update!!! New VP DH pro comps&dig with 649 hitec

Lowered it about 12mm...

 

[Googledit]

Here is my baby, the pictures are taken in my rock crawling course that I have been building over the last few days.

Sidewinder SV2
RC4WD 35T Motor
Robinson Racing gears in tranny
Overdriven Front axle
MIP Drive Shafts
Custom Make Links (break line and all thread and Jato rod ends)
GMade Transition Shocks
Axial Metal steering Links
RC4WD Baja Claw Tires 4.75" Custom Cut
Axial 8 Hole Beadlock
Running on 2s LiPos

 

[Qcustomz]

 

[TURTLE]

Axial JK kit version
Modified SCX10 beadlock wheel with MThead beadlock rings 2-56 stainless hardware and metal hubs to get more offset.
Battery moved to the front, weight added to the front wheels and tire carrier removed.
Also a couple of screws added to the windshield to keep it in place.

 

[Qcustomz]

 

[GoSpeedRCerGo]

 

[tozrovr]

 

[rockseeker]

 

[Barndog Racing]

Here is my brother and I with ours mine is the silver dingo with wraith axles what a blast!

 

[CAPCbass]

Here is mine, hope you like it.

Sent from my DROID RAZR

 

[kansei]

Had a great run today

 

[waterboij23]

 

[Pat M]

http://s288.photobucket.com/user/Renegadebob001/library/SCX-10 Jeep Cherokee chopped?sort=3&page=1

here's a bunch of pictures (couple dingo roll cages used & centers cut to bring them in tighter to fit in body)