Some Aluminum goodies and other stuff for your Losi MRC

[rckjeep]

Nice work Rich, I've just recently got myself a MRC from my local Hobbytown, where we've made some courses to hold some indoor night comps and some larger weekend outdoor(weather permitting)comps. This rig is really going to open up the market.

 

[Joat]

anybody know ???

Which one there's 2, but either should handle ,the smaller one is 12 amps rated output, the larger is 33 amps output
capacity = "c"
##c = discharge rate = capacity in mah x ##c
So..........
600mah x 20c = 12amps
1650mah x 20c = 33amps

 

[boom stick]

CV part no. LOSB1455 $20.89

 

[Rich Trujillo]

Here's the new CV's for the Mini Rock Crawler. These should be shipping by the end of this month.
LOSB1455

 

[punkuup5150]

another awsome product i cant wait to have

 

[dezslash]

Sweet cv's next on my list

 

[Tommy R]

Here's the new CV's for the Mini Rock Crawler. These should be shipping by the end of this month.
LOSB1455

Fantastic! Thanks, Rich!"thumbsup"

 

[hotwheels000]

Here's the new CV's for the Mini Rock Crawler. These should be shipping by the end of this month.
LOSB1455

Will they increase steering or improve the strength over stock ?? or both ?

Thanks
Devlin

 

[Pdog7]

will the losi lipo battery be enough to power a hitec 645 servo thru a tekin FXR and a JRH MTM ?

I have the 2 cell 1650mAh losi lipo with the hitech 645 servo, a holmes torque master mini and the tekin fxr. The 1650mAh lipo is more than enough to power the ht645 and still fit on the upper links. The tekin fxr has a built in BEC that is good up to a 2cell lipo, as well as programable lipo cutoff."thumbsup"

 

[Joat]

Will they increase steering or improve the strength over stock ?? or both ?

Thanks
Devlin

Should be both, there's no "play" between the pin and drive cup like the stock stuff, so less wear which means less flex, and hopefully they allow increased steering angle since the pin and drive cup is one unit and pin wont "pop" out of the drive cup.

 

[BILLYGOAT]

Rubbaneck Has These Installed On His Rig And It Does Increase Steering A Bit. You Just Need To Remove Some Material From The Knuckle And Countersink Some Screws . They Look Awesome

 

[hotwheels000]

I will check his thread out, thanks for the info.

 

[MAXXMASHER]

Anyone making metal diff lockers? I've been playing a little with our shop demo rig and already stripped out the rear. Our plan is to make a 8x20 indoor crawler course for these and 2.2's. I'd also be interested in a rear steer kit.

 

[Tanis]

Anyone making metal diff lockers? I've been playing a little with our shop demo rig and already stripped out the rear. Our plan is to make a 8x20 indoor crawler course for these and 2.2's. I'd also be interested in a rear steer kit.

http://www.rccrawler.com/forum/showthread.php?t=135753 "thumbsup"

 

[Big Bill]

Will the Losi, or any other 600 or 800 LiPo work with the stock ESC ,stock receiver and stock Servo. I plan to upgrade the electronics at a later date but would like LiPo now. Thanks

 

[Pdog7]

Yes they will both work. I had a 1650 lipo with the stock esc and no problems.

 

[rusty_rail]

runtime?

whats the runtime with the losi 2 cell 600mah and stock electronics?

 

[Sinagua]

In addition to run time with the Lipo... does the Losi charger account for balance in the charge? And does the Losi esc have a built in voltage cutoff?