T I N Y Builds A TRX-4M F-150...

[T I N Y]

The receiver got here today. So, out with the old and in with the new. Talk about a lucky break - the corners of the Injora ESC fit perfectly in the center grooves of the shock tower. So a little Shoe-Goo and in went the ESC & receiver. They fit just fine on the stock ESC tray side by side. The final lucky thing was that it all fits below the shock towers. Then the only thing left to do was make the wiring clean.

 

[T I N Y]

More of the RX/ESC install.

 

[HVACTeacher]

Nice! Super clean

 

[T I N Y]

Nice! Super clean

Thank you, Sir!

 

[T I N Y]

The servo mount came in today. (On a side note) It's a good idea to take pictures of what you're working on. Because you (Like Me) could put it on backwards the first time...lol. So, out with the old and in with the new. went with silver in color, just to add some bling to all that black. I hate parts with names on them. I understand they want to show it was them who made it, but you already know who it is. Because you bought it from them...lol OK, (down off my soapbox). So with that in mind, I took some 1500 grit to my "NHX" servo mount. No more name. Back in it went backwards the first time, then the right way. Then I noticed, even when it was stock. That there's a gap between the servo arm and the steering link. So, I added some washers to fill the gap.

 

[T I N Y]

And here's what it looks like all wraped up.