T1E ''Ti Fighter''

[kineteks]

No,I haven't tryed it that thin. I think that would be to thin and brake out or crack.

...and it'll only save about 10 grams:shock:
never mind

 

[Waiting Dragon]

You guys might wanna check out dragonplate.com they have some of the best CF available!

Hey Greg, if you were to use the shocks that you are running now with the stock berg axles, what springs and oil weight would you go with? Thanks!

 

[86jeep]

You guys might wanna check out dragonplate.com they have some of the best CF available!

Hey Greg, if you were to use the shocks that you are running now with the stock berg axles, what springs and oil weight would you go with? Thanks!

Thanks I'll check them out.
Probley start with mini t rear blue spring f+r with 50wt oil f+r.

 

[Waiting Dragon]

Thanks I'll check them out.
Probley start with mini t rear blue spring f+r with 50wt oil f+r.

Thanks for the info!"thumbsup" Great build!

 

[sally1800]

Greg it looks like your new set has 1.7 oz per wheel. Have you found running a rig that is mid 4 lb doesn't need over 2 oz per wheel?

Thanks

 

[sally1800]

Greg it looks like your new set has 1.7 oz per wheel. Have you found running a rig that is mid 4 lb doesn't need over 2 oz per wheel?

Thanks

I meant per axle side.

 

[86jeep]

I meant per axle side.

I would say 2 to 4oz, It realy just depends on the course's.

 

[rocknut36]

What did you cut your carbon fiber with? Looking Good!!"thumbsup" What thickness did you use?

 

[sally1800]

What did you cut your carbon fiber with? Looking Good!!"thumbsup" What thickness did you use?

You don't want to know. :ror:


The Man is a Cowbow


p.s. no boot's

 

[sally1800]

You don't want to know. :ror:


The Man is a Cowbow


p.s. no boot's

I mean Cowboy

 

[Waiting Dragon]

Hey Greg! Do you know if EGGRESSOR makes those knucle weights for VP nuckles too?

 

[86jeep]

What did you cut your carbon fiber with? Looking Good!!"thumbsup" What thickness did you use?

I use a big high rpm router. 2.5mm is a pretty safe thickness to use.

I mean Cowboy

:ror:

Hey Greg! Do you know if EGGRESSOR makes those knucle weights for VP nuckles too?

Not that it know of.

 

[whoodie]

Any last minute changes before Az since you got your butt whooped by a V1 T1E Berg? :mrgreen::mrgreen::mrgreen::mrgreen::mrgreen:

 

[86jeep]

Any last minute changes before Az since you got your butt whooped by a V1 T1E Berg? :mrgreen::mrgreen::mrgreen::mrgreen::mrgreen:

Got my new weight rings made so you better look out now. You should no things aren't always what thay seam tobe with me.:mrgreen:

 

[Rock Logic]

looking good greg see you in a week"thumbsup"

 

[86jeep]

looking good greg see you in a week"thumbsup"

Thanks, I cant wait.
Here some pic's of the new weight ring's. I can add up to 6.5oz per side now:shock:.
Thanks Shelby for the part number "thumbsup". I found a thicker ring too it's 1.5oz.

 

[Nova's Ark]

Got my new weight rings made so you better look out now. You should know things aren't always what they seem to be with me.:mrgreen:

The more time I spend with Greg the more I learn this is sooooo true:shock:. I am so excited for all you Texas guys headed to Arizona. As always, I wish y'all the best of luck"thumbsup"

 

[Mini]

Thanks, I cant wait.
Here some pic's of the new weight ring's. I can add up to 6.5oz per side now:shock:.
Thanks Shelby for the part number "thumbsup". I found a thicker ring too it's 1.5oz.

What does it look like with a wheel on it :shock::shock:

 

[whoodie]

I'm surprised you haven't made a mold so you can melt some lead into a ring.

 

[RickM]

Very cool on the weights. Couple of questions. What width does this put you at? Where did you get that washer?