-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
TLT Crawler Picture Archive
- Thread starter Plays_with_Toys
- Start date
Mad Hatter
Pebble Pounder
bronco sally
Newbie
here are som pictures just after paint
pede tranny
touring car shocks
goat chassis
moabs on hpi
carbon arrow links
novak xrs esc
jr xs3 synthesised
will post action pics after comp
pede tranny
touring car shocks
goat chassis
moabs on hpi
carbon arrow links
novak xrs esc
jr xs3 synthesised
will post action pics after comp
freetimecrawler
Debunking old stereotypes
My TLT
Last edited:
FFRCJosh
Quarry Creeper
BENDER Custom's SW2
Stampede Transmission with 87T 48P Spur
HS-645MG
Integy 45T Lathe motor with 12T 48P spur
Pro-Line 2.2 Moabs on spray painted black single narrowed pede wheels
HPI Ford Bronco body MAXX/Savage size
Revo Pushrods for lowers and stock TLT's for uppers
Between a 12"-13" wheelbase
Last edited:
azvader
Quarry Creeper
Rover
Custom Grover Rover aluminium beam chassis
WB- 12 1/2" Width- 10 1/2"
Center clearance- 3 5/8" max 3 1/4" ride height
Height- 6 1/4"
TLT axles w/frt and rr NO-JB lockers
Hitec 645MG BTA frt Hitec 475HB independent rear steering
Pede transmission w/90t spur and 12t pinion
SR w/55t lathe motor and 1050mah 9.6v pack
Pede Sliders
Custom 1/4" dia aluminium 4-links
Vintage Tamiya shocks w/ball end mod soft frt springs w/30w firm rr spring w/35w
Moab 2.2s w/hacked foams on narrowed Pede fronts w/4oz weights in each front
Vintage Tamiya Toyota Hi-Lux lexan body
Build thread
http://www.rccrawler.com/forum/showthread.php?t=31372
Custom Grover Rover aluminium beam chassis
WB- 12 1/2" Width- 10 1/2"
Center clearance- 3 5/8" max 3 1/4" ride height
Height- 6 1/4"
TLT axles w/frt and rr NO-JB lockers
Hitec 645MG BTA frt Hitec 475HB independent rear steering
Pede transmission w/90t spur and 12t pinion
SR w/55t lathe motor and 1050mah 9.6v pack
Pede Sliders
Custom 1/4" dia aluminium 4-links
Vintage Tamiya shocks w/ball end mod soft frt springs w/30w firm rr spring w/35w
Moab 2.2s w/hacked foams on narrowed Pede fronts w/4oz weights in each front
Vintage Tamiya Toyota Hi-Lux lexan body
Build thread
http://www.rccrawler.com/forum/showthread.php?t=31372
brendan h
Quarry Creeper
my TLT
hight- 3.2inch
WB= 12inch
batterys= epic 3000 and a 6v hump pack rated at 1500
action shots taken of my phone=
hight- 3.2inch
WB= 12inch
batterys= epic 3000 and a 6v hump pack rated at 1500
action shots taken of my phone=
Last edited:
Crawler downunder
Newbie
FFRCJosh
Quarry Creeper
There's ^^^^ his ^^^^^ pics. Just if your too lazy to click on 2 links
BOWTIE
Ultimate RC Decals
Rockatansky
Newbie
First TLT-1 Crawler Scale "Attempts"
I'm a HUGE fan of the TLT's capabilities, and I'm equally a HUGE fan of the Midnight Pumpkin Ford body. The marraige was OBVIOUS!!. I'll be adding a rollcage to the bed brown one soon. I'm gonna go for a "Truggy" look on it. Just waiting on supplies. My local NAPA autoparts store doesn't sell brake line (real bummer), so I've been searching for some. The link below will take you to the photos of my crawlers. And, yeah, the bumpers will be comming off soon!
http://miamireiki.com/crawler_page.htm
Catch you guys later.
I'm a HUGE fan of the TLT's capabilities, and I'm equally a HUGE fan of the Midnight Pumpkin Ford body. The marraige was OBVIOUS!!. I'll be adding a rollcage to the bed brown one soon. I'm gonna go for a "Truggy" look on it. Just waiting on supplies. My local NAPA autoparts store doesn't sell brake line (real bummer), so I've been searching for some. The link below will take you to the photos of my crawlers. And, yeah, the bumpers will be comming off soon!
http://miamireiki.com/crawler_page.htm
Catch you guys later.
Last edited:
