Transmission!!

[toyofast]

I have a transmission that has 2 speeds and a brake. I plan to use the brake as my dig lockup on the output. Will this work?

 

[EeePee]

As long as you adhere to the 2009 rules that state reversing ESCs aren't legal.

 

[grob23]

wait a tick... (don't mean to steal the thread, but...) you can't have an esc with reverse for 2009 comps? :shock:

 

[EeePee]

Nope.

 

[toyofast]

As long as you adhere to the 2009 rules that state reversing ESCs aren't legal.

I better start learning now!!

Plug in Mamba Max... Set to Fwd/brake.... go drive!

 

[todd1803]

wait a tick... (don't mean to steal the thread, but...) you can't have an esc with reverse for 2009 comps? :shock:

Just a reminder.........


This is the internet, don't believe everything you read. :roll:

 

[grob23]

mmm... it doesn't matter... I'll never enter a comp...:x

 

[toyofast]

Just a reminder.........


This is the internet, don't believe everything you read. :roll:

Better not believe the above statement either.....




BTW, 2009 Nats will ban reversing ESC's;-)

 

[01XJ]

Better not believe the above statement either.....




BTW, 2009 Nats will ban reversing ESC's;-)

why is this? :roll:

 

[EeePee]

Stepping it up a notch yo!

 

[01XJ]

Not that it matters to me the chances of me making it to nat's is well...we get the point:roll: but i still think it is stupid:roll: but Is there a link to the new 2009 rules? i searched and all that came up was this thread;-)

 

[toyofast]

Not that it matters to me the chances of me making it to nat's is well...we get the point:roll: but i still think it is stupid:roll: but Is there a link to the new 2009 rules? i searched and all that came up was this thread;-)

This is my thread, not yours.....


Back on topic.


Will this transmission fit on my stick?

 

[JohnRobHolmes]

Just make sure you have the right driveshaft size to adapt to the clod input shafts and you should be good. It is a centerfugal two speed right?

 

[Brandon]

Just make sure you have the right driveshaft size to adapt to the clod input shafts and you should be good. It is a centerfugal two speed right?

And if you are running a 55t lathe, be sure to set the shift point at 54turns otherwise it will never shift.

 

[toyofast]

I have a small torque converter like thing to help with low end shift points. I took it off my T-Maxx LMK thanks.

 

[Grizzly4x4]

The 2009 rules won't be done until 2010 so you are good.

 

[toyofast]

The 2009 rules won't be done until 2010 so you are good.

That time machine will come in handy now.

 

[EeePee]

54 turn shift point? I'm starting to think this thread isn't real.

 

[toyofast]

54 turn shift point? I'm starting to think this thread isn't real.

It's real... Hey.. get back here. No one told you to logout! You've been logged in for about 7 hours byotch, you can leave now!!

 

[dezfan]

Wait, you mean the new reversing tranny I have been testing will be illegal as well, or just the reversing ESCs?

And it's closer to 53 turns if your using the Clod shafts. It doesn't make a huge difference if you were to use a centrifugal clutch though.