TTC entry thread

[War Pig]

Thats right guys, time to get your TTC entries in for the 2012 Northwest Scale Championship TTC sponsored by RC4WD.

The 12 trucks that receive the most votes will get in. Please include at least 3 pictures, complete specifications and a short statement as to why you you think your truck should be voted in. This thread will be open for 28 days, then a voting thread will open.

Let's see them!

 

[MG200]

MG200 Designs - Showtime

Specs:
MMP ESC
Pro4 3300
3s 2200 pack, and 4s "thumbsup" for mud bog, hill climb, sled pull
Caslte Pro BEC
Hitec 7980’s front and rear (600oz!8))
Hitec 7955 servo winch with Warpig spool and kevlar line
Stainless links with Revo rod ends
Traxxas big bore aluminum shocks
Cut RC4WD Iroks
VP wheels
VP axle trusses
Axial wraith axles with aluminum knuckles and C’s front and rear
Blue Monkey front knuckle weights
Beef tubes in front axle
Felsenfest spools
100% waterproofed
Weights 9.5lbs

Thanks for the chance at this years NWSC TTC 2012. I built this rig because I enjoy watching the videos of it on Youtube. There is just something about seeing it rip up the hillsides with reckless intent!:twisted: I’ll be doing the same if I get voted in! Thanks!

Full build here:http://www.rccrawler.com/forum/axial-wraith/381896-mg200-designs-showtime-2-a.html

 

[justinart24]

First off, I want to thanks Tim (Warpig) for setting up and getting this National event going, thanks Tim!

Here is my entry for the 2012 Axial Northwest Scale Championship.

Thanks in advance for anyone that may vote for me. I promise to put on a show and drive this truck into the ground.:mrgreen:"thumbsup"

Build Thread...
>>>CLICK HERE<<<

Axial Wraith Axles (Coming Soon)
VP Knuckles (Front&Rear)
VP C-Hubs (Front&Rear)
Axial Universals CVD

Suspension
VP Vanquish Axial Rear 4 Link plate (Front and rear)
4-Link 4mm links Front and Rear
Proline SCX10 Shocks

Drivetrain
MIP DriveShafts
Axial Trans with Alum case and all alum goodies

Electronics
Mamba Max Pro
Traxxas Brushless 10t motor
Hitec 7950 Servo (Steering, FRONT&REAR)
Hitec 5645 Winch Servo (Winch)
CCBEC

Chassis
Axial SCX10

Body
Tamiya Clodbuster

Wheels and Tires
2.2 CAC EZ Loc Alumniam Beadlocks
2.2 RC4WD Baja Claws

Here is a video from last year.
<iframe src="http://www.youtube.com/embed/7cObJ8PkkTw" allowfullscreen="" frameborder="0" height="315" width="560"></iframe>

 

[War Pig]

War Pig's '34D

Build thread here: http://www.rccrawler.com/forum/2-2-scale-rigs/340381-war-pigs-all-new-34d.html

Specs:

Chassis:
SCX10 with custom thinwall stainless tube work

Drivetrain:
Built Axial transmission
GCM t-case
MIP CVD drivelines
Tekin RS Pro
Pro4 3300

Axles and suspension:
Built Wraith axles with Axial uni's front and rear
Custom built delrin skid
3-link with panhards front and rear
partial droop internally sprung shocks
All titanium links

Electronics:
(3) Castle BEC's
7980 steering servo front
7950 steering servo rear
Quicksand winch on 3s with Heyok relay controller
645 rear internal spool servo winch

Wheels and tires:
BAM 2.2 by .7" aluminum beadlocks with custom disc brake hubs.
2.2 Pitbull Rockbeast tires (possibly Rockbeast 2's if they are ready) with CI foaams

Body and paint:
Parma '34 Ford pickup
Custom paint by Rockthrasher

These TTC competition's are what I live for. I haven't had a TTC comp on my railroad for the last year because I knew we were doing this one, and I didn't want anyone thinking I'd have an advantage. The courses will all be completely reworked and this being a new truck has not been on any of them. I built this truck specifically to be a competitive Class 3 and TTC truck, and would love to have the chance to see how it stacks up against the best. Thanks, Tim.

 

[666]

The EB

The EB

Iconic build by War Pig

Build thread:

http://www.rccrawler.com/forum/2-2-scale-rigs/161172-war-pigs-eb-truggy.html

Specs:

Custom tube work built to work!
Beefcake Axial transmission
Dennis Fab T-Case
Tekin RS-Pro ESC (may go back to a HH BRXL)
Tekin Pro-4 3300k motor (may go back to a HH 7t Puller)
2200 3s and 4s battery packs
Built Axial AX10 axles, aluminum housings, HD gears, SDS CVD's, VP knuckles
MIP driveshafts
3 7950 Hitec servos, front steering, rear steer(coming soon?), and winch
2 CC BEC's
Stainless links with Revo rod ends
Unknown Rims running Pit Bulls

I would like another shot at running in the TTC this year and if I get voted in there is no way in hell this truck is saying no to anything less than first!! I thank you for your vote in advance and hope you give us a chance to take her home!

Thanks,
Patrick

Oh and some pics! Thanks to RPMJ, C*H*U*D and Mad4Rnr for the Awesome pics!

 

[CoreyHall]

KOH 68 Blazer Buggy

Build thread: http://www.rccrawler.com/forum/2-2-scale-rigs/376749-koh-68-blazer-buggy.html

Chassis:
Scratch built tube chassis. 3/16

Drivetrain:
Built axial trans stuffed with steel gears.
Mip drive shafts
Tekin pro4 3300
MMP

Axles and suspension:
Built AR60's
Axial unis front and rear
3 link with panhard in the front
Triangulated 4 ling in the rear
Links are 1/4 o.d .049 wall aluminum tube with Revo rod ends
Shocks are SCX10 shocks mixed with RC$WD scale shocks.
SCX10 skid

Electronics:
2 Castle bec's
Hand Bros 3 led offroad lights
2 Savox 1283tg servos Front and rear steer.
1 Savox 1268tg servo winch with Warpig Spool... soon to be 2. front and rear

Wheels and Tires:
Either 2.2 Super Swampers with Coleworx cut on Mayhem Monsters, OR
2.2 TTC Baja Claws cut with RC4WD Hummer wheels
Stuffed with CI foams

The Body:
Proline 72 Chevy truck Narrowed to look like the 1.1
Paint is Krylon color is Jade. This is what we used on the 1.1 to paint accessories to match the body. Its perfect

I am such a huge TTC fan. The 1.1 event and the 1/10. I want to see if the best I have can compete with the best of RCC. I built this rig to take a beating, and If I make it in, A BEATING IT WILL GET. This Challenge is why I built this buggy, To see If I can build a contender. I will update the pics as I add more to the buggy. If the 1/10 Blazer Buggy makes it into TTC, Im briggin the 1.1 with me.

Here is a video
http://youtu.be/dqh1fqMaQx8

 

[Difuser]

Difuser WideLux

WideLux

WideLux build Thread

Specs:

Chassis:
SCX10 / Wraith/ Custom

Drivetrain:
Built Axial transmission
MIP CVD drivelines
Mamba Max Pro
Tekin T8 2200

Axles and suspension:
Built Wraith axles with Axial uni's front and rear
3-link Front with 4-link rear
Full titanium links

Electronics:
(3) Castle BEC's
7950 steering servo front
7954 steering servo rear
Quicksand winch on 7v

Wheels and tires:
VP SLW v6 1"
2.2 Pitbull Rockbeast tires with CI foams (duh)

Body and paint:
Custom Toyota King Cab HiLux
HiLux Bedsides
Interior is getting reworked from the pics with new team3six goodies so stay tuned.
Off white and lettered with the guys who support me
Locked Up RC
Team3Six
Holmes Hobbies

The WideLux has taken a few different turns to get to this TTC. It started out as a 1.9, then received Wraith Axles, skid, tube changes, and refinements. I love to build and love to drive.
Tim's TTC comps are the best around. I took a tied second with Ryan G @ the last 2.2 Tim held, after winching through the entire tank trap to finish the course. TTC is about the fight and keeping the truck moving forward.

IF I am voted in the parts box comes along and until it's dead or has finished each course, the WideLux will still be running.

 

[Harley]

Harley's Jimmy's Ultra 4

The most viewed scale build ever on RCC.
http://www.rccrawler.com/forum/axia...raith-build-jimmys-4x4-ultra-4-koh-style.html

Specs:
Chassis

• Jimmy's 4x4 by the DMG

Drivetrain

• Full VP Wraith axles
• MIP drivelines
• Fully built trans
• Tekin 3300 Pro4
• Mambe Max Pro
• 3s and 4s packs

Suspension

• Proline Powerstroke shocks for Slash
• All titanium links

Rolling Stock

• Axial R35 Ripsaws
• Vanquish SLW V1

This trucks has been watched by thousands of people, it has been an awesome journey pulling it together from its roots as a stock Wraith RTR.

<iframe width="560" height="315" src="http://www.youtube.com/embed/HDx0Qafk1a0" frameborder="0" allowfullscreen></iframe>

 

[rcscaler]

4 Door TTC JK

4 Door TTC JK Build Thread

Specs:

Chassis:
SCX10 chassis with custom tube work

Drivetrain:
Built Axial transmission
MIP driveshaft
Mamb Max Pro
Tekin 13.5T

Axles and suspension:
Built scx10 axles with Axial uni's front and rear
3-link Front with 4-link rear
Full custom 4mm alum links

Electronics:
(3) Castle BEC's
7954 steering servo - front
7955 steering servo - rear
5955 steering servo - Winch

Wheels and tires:
VP SSZ-11 2.2 wheels
2.2 narrowed Pitbull tires

Body and paint:
NewBright 4 Door JK body
Full Interior with 4 seats, need to be finished soon

This is slightly the inspiration.

well, hope to get vote in and compete with all of top drivers this year....JK FTW"thumbsup"

 

[FRENCHBLUE72]

My blazing taco........

2012 tube chassis custom made
vanquish ar 60s front and rear
vanquish links all around
mayhem wheels
pit bulls
hi tec hs-7954 sh steering servo
mip shafts front and rear
wraith shocks all around
nova foams
led light bar
wraith interior
q.s. winch
summit 2 speed
tekin 3300 pro 4
tekin rs pro
castle bec
3 cell 2200 batts
I think thats about it... I have been building this truck for this event I am as far as I know the only one with a 2 speed trans.. I will beat this truck untill it gives up.. Its fast and it can pull some weight vote me in and you will not be dissapointed...... I know I need to finish the truck and add the scale points but just getting back from axial fest and I will finish this truck asap...

 

[War Pig]

That's it? 10 entries? Wow, maybe we won't have to vote after all.

 

[Pancho]

For your consideration: Pancho's DIET TUNDRA


SPECS:

SCX rails w/lots of custom tube work
Removable tube bed (planning on hard bed)
Modified Losi skid w/Traxxas links
Losi axles
Losi dig trans
Losi shocks
Losi drivelines
Lunsford steering links
Custom mounting plate for servos
Tekin RS Pro 10.5
Savox SA-1283SG steering servo
Savox SH-1250MG dig servo
Hitec HS-7940TH winch servo
CC BEC
Racers Edge glitch buster
Futaba 4PL
3 cell
Narrowed Tamiya Tundra body
VP SSZ Star 2.2
Ripsaws w/C.I. foams

Things to do:

Build interior
Waterproof
Complete bed
Lots of scale accessories
BEEF THE HECK OUT OF EVERYTHING !!!!


I am new to the forum so I know my chances are slim. This is a cash or crash deal and someone has to be willing to vote to see this bad boy win or go back to Utah in a box. This truck will be better, faster and stronger for this event and will not quit until the spare parts are gone.

I have enjoyed building this rig and would appreciate the opportunity to destroy it for your viewing pleasure."thumbsup"

 

[chino63]

That's it? 10 entries? Wow, maybe we won't have to vote after all.

Be patient, I'm working on it!

 

[4VRYNG]

That's it? 10 entries? Wow, maybe we won't have to vote after all.

and you have been heavily involved in the building of 3 of those.

 

[mud digger]

The Crawlmaro will giive it a shot once its in TTC form :twisted:

 

[doublej]

I still Have 20+ days by my count.......

 

[wheelinjp]

ok I will give this a shot. sounds like fun.

wheelinjp's fj45 tuber

specs:
axial axles, stock housings, over/under gears, axial bta w/ axial alum inner c-hubs, stock rear lockouts (no rear steer)
axial cvd's (may have super 300's by comp day)
mip d-lines
axial tranny w/ alum case, rr gears, rr 87t spur, rr 14t pinion (no dig)
35t HHK Team BrOOd power
tekin fxr w/ ccbec
powerstroke scaler shocks
motowerks 2.2 wheels w/ c.i. double duece'd 2.2 proline TSL swampers
custom tube chassis from 3/16 hydraulic tube, nice custom tube work with tamiya lexan front clip and grille. outstanding tin work came with this body. will likely get a different body and tubework color but we will see. Might have a big blower motor sticking through the hood too, not sure yet. "thumbsup"

 

[wheelinjp]

Holy crap I might have to throw my mmpro and brushless power in my entry.

 

[EVOLONE38]

Hello to all.

Name: Mike Black

Wheels: The Heep

Details:
'06 Hulkworks full rail, tuber Jeep.

Running gear:
Hot racing trans case
Hot racing spool
RRP locker gear
RRP idler
no slipper
double motor mount plate setup
45t pinion and 69t spur.
MIP center drives.
25 to 1 ratio worm gear axles.

Vanquish narrowed SX wheels on some kind of tire, possibly the ones pictured.

Electrics:
Nomadio Sensor
Savox 1283sg swervo, "may change"
Tekin R1 pro
AC Mega Motor 6000kv pro
3cell 50c lipo
3 bec system
2 esc controlled winches
3 Racing light controller
led's n things.

Other kick knacks:

Lunsford Ti links
Tamiya TNX shocks
Traxxas rod ends and HD upper links
it is a heavy 11lbs+
will have an onboard driver aka" Sebastien Dirtay" and me, trying to guide him successfully somewhere.
We will make it or break it, as always.
Some things are going to be added, like maybe, moar scale points, yes moar.*

Old video with slow gears:
MVI 1724 - YouTube

Pixels, thru the years:
Current tranny

Tank Trap

Old school TLT axles TTC shot

Early 2012 stance

Spring park goodness
http://evolone38.com/uploads/3/0/5/7/3057675/5848098.jpg?888

Well I think that about covers it. Most of you all know me and if you don't, I like to to hammer down, FYI.

 

[chino63]

So here's my ever faithful FJ45, once again fighting for a spot in the TTC.

Edit: Here's the link to the build (should have added this sooner).
http://www.rccrawler.com/forum/2-2-scale-rigs/241196-chinos-ttc-fj45-build.html

Very little has changed on her since last year. I see all the builds coming together for this year and can't wait! Many with Wraith axles under them but for me and my driving style, I prefer the narrower track width. I tried her with my Wraith axles but didn't like the way it handled or how the axle clearance was due to the wider stance. Many of the trails I ran on were tougher with the wide stance compared to the tried and true 3racing axles with XR10 front knuckles. My experiments otherwise always seem to bring me back to it's current setup. I will say though, there will be changes made to the shock setup for this years TTC. I like to be the underdog, it makes me want to win that much more, I know I will be under powered compared to others as well as lacking the side hill capability of the Wraith axle clad rigs but I guarantee I will put on one hell of a show trying to topple the big dogs this year!


BTW, I will be doing it old school style!! That means NO dig and NO 4WS!! Real men don't need that sissy stuff!!!



Last year I placed 5th in TTC and feel I could have done much better if my DX6 throttle gimbal didn't break during the first course, leaving me with 1/2 throttle all the time. A not so quick swap to my DX3 kept me in the game but for some reason the steering was not as good as the DX6. Meh, better luck next... I mean this year! :ror:

Here's where we sit for this years voting.

Custom built FJ45

Well worn Bruiser frame
Tamiya FJ40 body cut to FJ45 cab
Flipped and narrowed Unimog bed
Custom 3-link up front and 4 link rear
3racing aluminum axles with XR10 steering
MIP shafts
RC4WD shocks up front, Axial SCX10 rears
Mayhem wheels
Proline TSL tires

Mamba Max Pro ESC
Novak 18.5 sensored brushless Castle BEC
Custom winch controller for 4s fun
Hyperion 4s Lipo
Spektrum DX6
Quicksand 8274 winch out front and 3racing winch out back (both on 4s of course)
Chino63 lights (to blind the camera guy)

I'm ready to entertain!! Rock chuckin', mud slingin', sled pullin', high flyin' madness!! "thumbsup""thumbsup"

One more thing, I'd like to thank everyone once again who voted for me last year, I hope I can gain your vote again this year. Those of you who are new to this awesome website and don't know me, please vote for whom ever you choose. There are many worthy trucks and drivers in this years TTC line up, everyone well deserving of the chance to compete. Thanks for looking!

<!-- google_ad_section_end -->