• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

venom lipo's?

desertmaxx

Quarry Creeper
Joined
Sep 3, 2010
Messages
464
Location
t(._.t)
the guy at my hobby shop tels me they are prone to exploding. something about a tab on the cells breaks off, then they explode. i was interested in the 2s 10,000, but i dont know now. any opinions? people having problems with them?"thumbsup"
 
I have a 3s 2100mah venom lipo and it's been fine far. My friend has one as well and hasn't had any issues. That also have a 1-year warranty I believe.
 
I have 2 Venom lipo's. One was my first rc lipo. 2s 4,000 mah 20c that cost me $40 if I remember correctly. Was about 3 years ago. It has been the best Lipo i have had. Hard case which is a plus. And it performs flawlessly. Balances quicker then any other battery I own and some are very top of the line brands. I have probably 175- 200 cycles on it now. And it has shown no signs of wearing out. Now the other Venom lipo I have is a 3s 5,400 mah. And it performs ok. Does not have as much power as some of my other 3s batteries. And always takes a ton of time at the end of the charge to balance. So I guess you could say my luck has been hit or miss on them. But in the 3s 5400's defense, it was very inexpensive for it's size. I paid like $35 at a hobby store for it. Just cause I needed one and I didn't have the cash to buy a better one at the store or order one online. I got the 3s 5400 about a year or so ago. looks completely different and is a soft case version.
 
I have some 2s and 3s venom lipo's and have not had any issues. On one of my 3s I had a cell drop down to 1.7 volts (my fault) :oops: and had to bump charge it. It works fine now.
 
I have 2-2S 5000 packs and I've ran a few other Venom packs that were my friends, never had any issues with them. In fact, I bought my pair from a member on here that said there was a chance they were no good, hadn't been used in a LONG time. One pack was at 3.7v per cell, the other was below 2.0v per cell. Took my time bringing the lower one back to a safe level and it charges & discharges just as it should.
 
I have a Venom soft case 3s and two hard case 2s packs and they've worked great since new. I take very good care of my packs and never even let them reach the cutoff voltage of my ESC's. I have read on other forums about cold/broken solder joints in some Venom 2s hard packs, but they were replaced quickly under warranty.
 
Back
Top