What did you do to you SCX-10 today?

[Johnnysplits]

Ordered a pair of HR high steer knuckles

 

[skybolt]

Finished it!!


Sent from my iPhone using Tapatalk

 

[6sharky9]

Made a video of it

 

[crazy nick]

I moved all my electronics to the front and farted around w/ an external bec. Hopegully my tires and wheels come tomorrow so I can finally finish my body.

 

[racin707]

Installed a prototype electronics and servo winch cms kit

Sent from my VS980 4G using Tapatalk

 

[Noll11]

Managed to break my kludged together rear driveshaft (sheet metal and epoxy can only do so much). On the plus side, the new one i ordered as well as the lurc winch I won and bumper I bought will arrive tomorrow! Perfect timing.

 

[Johnnysplits]

Ordered a set of Junfac driveshafts

 

[alageezer]

After weeks of reading and confusion, finally made up my mind and ordered a Rubicon RTR. Plans are to run it bone stock until I learn a lot more. I haven't run an rc anything in 10+ years.

Got a couple good runs in, and doing extremely better than I thought. These things actually do pretty good right out of the box. Tomorrow I'm going to raise up my front bumper and relocate the battery to the front. Also have a driver to cut down and install when I get the time.

 

[Johnnysplits]

On the fence about getting the new warn winch from RC4WD. The 3Racing winch I just installed has about 6 seconds of use. Ugh!

 

[Postclanker]

Played musical wheels and tires....sooooo many little screws. Now both rigs have shoes and ready to run. Where's the rocks ? "thumbsup"

 

[klimb2xs]

Got started on the interior.

 

[Richterat83]

still tweaking my CMS setup but i think it's about done

I had made an aluminum plate but my measurements were off and broke a screw off in it, so it's scrapped.

So i used the shock tower mount with the legs trimmed off to mount the servo plate to the front end


Also spent Saturday at work in the shop. Not my prettiest work, but i just wanted to know if it all fit. I might machine out new components in the future, but they work as is

Upper link mount for the front as well as panhard setup




I am getting maybe 1/16" compression (only if both fronts are fully stuffed) of travel limited by the panhard hitting the axle, but i'll live with it for now, but may try to put a bend in it

 

[Trump1]

I powder coated some wheels. Take a look and see for yourself.

 

[MCW24]

Installed a winch I had laying around, proceeded to kill it in five minutes and then built a servo winch. time to fab up a mount and see how fast i can break this one lol

 

[jeepscx10]

threw a driver in the jeep lowered the front of the body, fixed servo mount, added a scale coke can in drink holder in interior made a scale tow strap. waiting on ccbec and bumpers to arrive so i can mount my winch

 

[RubikonKid]

Don't have my SCX10 yet (opening it tomorrow) but I just ordered the Axial aluminum steering upgrade and the Axial 25t servo horn. Ordered new foams and an upgraded servo bearing yesterday. Will be ordering the Vanquish 4-link conversion kit in a few days

 

[Richterat83]

while testing the new front end setup, the solder joint on the motor (factory solder joint) failed. . . . So just resoldered new leads on from motor to ESC

 

[Norton]

New KMS servo winch showed up today."thumbsup"

 

[XcrawlerkidX]

Watched it collect dust. Waitin to finally order a new servo and maybe some other goodies for it maybe at the end of this week. Cant wait!

 

[h8onit]

Got some new hd diff gears. took the tool kit then put everything back up.