-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
What has rc crawling come too..
- Thread starter D-ran83
- Start date
OptikCrawlR2134
Newbie
Sounds like crying bitches to me. This is not a sport either, more of a hobby.
I am a Noob, just because...I understand that. I spend more time with 1:1 rigs then I do with these. And same goes for Real wheelin' The trails are clogged with more assholes that think just because they have a Jeep, they can go anywhere. Then end up toppled over, slow everyone down, or dead.
Everything No matter what you do is going to become more "Mainstream" Thats the way it is, and always will be.
There is no use even to Rant about it. It has been said/done to many times before, and is pretty much now a "waste of your breath", if you do so. Yes, I am wasting my time " Preaching to the Choir" Because I have like 9 posts, am Considered noob, since I joined a Forum, and you don't know me?
Does this mean I couldn't have had prior knowledge, before the forum?
Rant over. Wasting my time and energy.
Last but not least, I love how everyone Forgets they were a "Noob" and had to start somewhere. I guess everybody just popped out your mom's asses with Genius minds..............
I am a Noob, just because...I understand that. I spend more time with 1:1 rigs then I do with these. And same goes for Real wheelin' The trails are clogged with more assholes that think just because they have a Jeep, they can go anywhere. Then end up toppled over, slow everyone down, or dead.
Everything No matter what you do is going to become more "Mainstream" Thats the way it is, and always will be.
There is no use even to Rant about it. It has been said/done to many times before, and is pretty much now a "waste of your breath", if you do so. Yes, I am wasting my time " Preaching to the Choir" Because I have like 9 posts, am Considered noob, since I joined a Forum, and you don't know me?
Does this mean I couldn't have had prior knowledge, before the forum?
Rant over. Wasting my time and energy.
Last but not least, I love how everyone Forgets they were a "Noob" and had to start somewhere. I guess everybody just popped out your mom's asses with Genius minds..............
GIT'em tiger:lol:
OptikCrawlR2134
Newbie
Yes, Sir!"thumbsup" Love your Quote in the Sig!
Rat1
Quarry Creeper
X2 to that
Sorry, Bruisers are not ARTR, they were kits.
This thread has turned into a whining bitches bithing bout whiney bitches & noobs justifing thier noobness. Too funny.:roll::lol:
jaxcoffee
Quarry Creeper
Tell a noob he is one and he will expload!"thumbsup"
Man there is a lot of smoke coming out of this thread.
Man there is a lot of smoke coming out of this thread.
Rat1
Quarry Creeper
Kits or whatever, the ax 10 is a kit is it not? It also took away from the build it yourself attitude since the kit has directions and most averything needed in it to create a semi capable rig.
Just remember that not everyone has the equipment needed to CNC up a set of axles and a chassis to make their own.
How about radio gear. I know some diehards that but together their own receivers, ESCs and the like.
Just remember that not everyone has the equipment needed to CNC up a set of axles and a chassis to make their own.
How about radio gear. I know some diehards that but together their own receivers, ESCs and the like.
what it comes down to in the end is that the sport is growing and that is great. noobs are every where and that is great. some are not so smart that isn't so great but it doesn't mean you should label all of them that way. some need to be pushed in the rite direction.
Just for the record. To date....EVERYTHING I've built for my rigs has been whittled out of raw stock with either a hacksaw,sawzall,4 1/2" grinder,itty bitty drill press or cordless drill. You don't need a CNC shop to compete with the top players. Common hand tools will do just fine if you know how to use them.
Now that I'm working at a full blown CNC shop.....it's different:lol:
Yeup.:lol:
I collected a bunch of old burnt out drills for them to build with.:lol::lol: Still got a bucket full of them in the barn:lol::lol::lol:
Krawlin
Quarry Creeper
No kiddin. I have never seen one myself... are the gears pretty strong? I ask becuase I am planning to have a scale build sometime in the future, and I need an easy transfer case/gear reduction, as I do not know how to make one... Anyway, would you happen to have a picture of what these gear reduction units look like? Thanks. ;-)"thumbsup"
Some of you old hens need to get over yourselves. I ain't seen an RTR crawler yet. Yes, I bought an AX-10, big deal. Ya gotta have somewhere to start, don't you?
You old timers should be passing some of your knowlege down to n00bs, how else is the hobby gonna grow? And if we're stupid and lazy, ain't that just more of us for you guys to shame in competition? Some of you people are just gonna run new blood out of the hobby, and that ain't good for no one is it?
I've been into nitro for more years than not. Yeah, some n00bs are a pita, and some of them take a little advice from you and whip yer butt on the race track. It's all about competition and comraderie, ain't it?
Or is it just about who's been here the longest?
You old timers should be passing some of your knowlege down to n00bs, how else is the hobby gonna grow? And if we're stupid and lazy, ain't that just more of us for you guys to shame in competition? Some of you people are just gonna run new blood out of the hobby, and that ain't good for no one is it?
I've been into nitro for more years than not. Yeah, some n00bs are a pita, and some of them take a little advice from you and whip yer butt on the race track. It's all about competition and comraderie, ain't it?
Or is it just about who's been here the longest?
I'll look and see. Some are not useable....parts missing and/or broke. I may have a couple complete drills that are good for junkin.:lol:
toyofast
I wanna be Dave
Do you have valid proof of everything you just stated? Sounds like you are a Lipo expert.
I need more beer..... all the byotching on RCC and at my house is making me a drunk. I can't wait to fall asleep tonight, drunk.
Shaun
Rock Crawler
They aren't toy grade, but, yes they are toys and thats all they are and they will never be much more than a toy.
