What motor/ esc set-up are you running in your ascender?

[Dhallmark]

What setups are ya'll running in your trucks. I've got a couple of Holmes Hobbies torque master sports 35t out of my comp crawler that I was thinking about using with a tekin fxr but I've thought about going to the mamba/ tekin roc brushless combo. Thoughts?

 

[BJoe]

I've just put a kit on layaway and am looking to put either a AE2 or the RTR model's ESC in it with a Traxxas 21t and using a couple small 3s packs in parrallel.

 

[vipxj]

AE2 with a CC BEC( do I need a BEC), an integry 35t .

 

[MudMonster]

Side winder 3 5700kv combo kit on 2s

 

[jeepgeek2002]

hobby wing wp1060 (waterproof) + outcry 35t motor + Savox 0231 waterproof servo (SAVSW0231MG) - Brushed
Mamba Max Pro (non wp) + 17.5 sensored motor + Savox 1230 nonwaterproof servo - Brushless

 

[jeepgeek2002]

Side winder 3 5700kv combo kit on 2s

its a crawler! not a KOH buggy! lol
5700kv you crazy! :lmao:

 

[MudMonster]

its a crawler! not a KOH buggy! lol
5700kv you crazy! :lmao:

Nah, It's not a crawler its a mud bogger that travels down the occasional trail to find a new mud hole.

 

[SteveC6R]

Ascender is in route, planning on a Roc 412 3100kv and MMP.

 

[zanthrax]

ESC: Hobbywing Quicrun WP1060
Motor: 45T RC4WD
Battery: 2s lipo
Servo: TowerPro MG996R
Tx/Rx: Axial AX-3

 

[M1tch]

Tekin FX-R and 35T handwound. Very smooth compared to my MMP and 35T HD in my other truck.

 

[Johnnysplits]

At the moment a HH BRXL wp esc, Atomik 55T brushed motor, a pair of GForce 3s 4000 mah run in parallel.

 

[Cult Hero]

good info in here. Just starting my build and this will be my first since I was a kid. They have come a long long way!

 

[6.2blazer]

Roc412 3100kv and MMP here with 2 speed. Crawls awesome and still plenty of wheel speed.

 

[SilmarilS]

ROC412 2300kv coupled to a Hobbywing 10BL60-Sensored turning a 16T pinion on 2S (3s sometimes)
Servo is now a Savox 1232SG.

 

[SMFtwstdHICK]

35t Integy Motor/ Tekin FXR or Axial AE2. Not sure yet.

 

[josh6575]

55t holmes motor, mamba micro pro, 3s

 

[aircooled]

30T Team Brood Axle Buster with lowest gearing possible, Holmes BRXL on 3S

 

[Nissan231]

hobbywing wp1060 and a silver can on 3s. Gets my junk around

 

[jdmguy760]

Roc 412 3100kv MMP 16 87 gearing on a 5000 mah 3s hitec 7954sh at 6.5v for steering hitec 645mg at 6v for shifting

 

[fullsizecrawler]

1.9 ascender is tekin rs with a 7.5t thunder power sensored motor
2.2 ascender is a castle mmp with a roc412 3100 kv
both run on 2s