Wheely King Crawler Picture Archive

[chris_dishmon]

wife's K5....

all steel trans and diff gears, waterproofed servo, waterproof xl5 esc, integy 45 turn motor geared a bit lower, hpi grabbers on MIR beadlocks.

 

[chongdigga]

Still evolving Sand King

 

[jsj1982]

here it was

now here it is. still a work in progress.

 

[Toyo496]

Heres mine:

-Traxxas 2075 servo stock location (soon to be on front axle)
-HPI crawler kit
-Saturn 35T motor with HPI gear reduction unit
-modded motor plate to fit 31T/93T gears
-home built front steering and rear lock outs
-heavily cut body
-550 cord for the dumb body clips (this adds Horse Power)
-3.2 Maximixer Beadlock Wheels (rock rings not shown)
-HPI Savage GT tires 6"+ tall

 

[uplate]

http://www.rccrawler.com/forum/showthread.php?t=240227

SOME OLD AND NEWER PICS ;-) .

 

[scadenag]

HPI Crawler Rubicom

I have a HPI crawler with Rubicom body, I see you have a problem of balance in the dampers, the body always tilts too far to the sides and it makes you lose stability in the stones, which I recommend be done to improve the crawler.

 

[Daddy NS]

CK on the Rocks....

Out of the box it Rocks! "thumbsup"

 

[Napalmhun]

Well, this is a WK also

Build thread:
http://www.rccrawler.com/forum/showthread.php?t=224650

 

[dstroy74]

hpi stretched kit , mud slinger tire,jconcept wheels,blackfoot body, ckrc shocks, ckrc 4ws servo kit, traxxas waterproof esc and servo, 96/15 spur, 45t integy motor

 

[Karadjas]

 

[openeagle]

my not so out of the box scale crawler.

 

[Barticusrex]

Joe King

Stretched wb 10.3''
composite links (sullivan graphite tube + old antenna)
2.2 moabs
scratch built aluminium skid plates (diffs and trans
soon to be rebuilt in to a scaler

 

[Evandiego]

Defender 90 WK

Here is my WK with my newly painted Defender body.
Crawler conversion kit, STRC middle bend links rear, Mico engineering servo plate, Hitec 645MG servo, 55T integy, 13T to 27T pinion depending on my mood, HPI 96T spur, locked tranny slipper with glue and a couple screws, 11.75" wheelbase, 2.2 Proline Titus beadlocks with 8 ounces each tire in fronts and 3 ounces each tire in rear. HB Pink Rovers with Proline std. foams front and stock Rover foams in rear, I also have a set of Flat Irons, Airtroniks MX-sport 2.4ghz radio, CC Sidewinder esc (highly recommended), 80wt oil in rear shocks plus orange integy springs, 40wt oil in fronts with stock springs.

 

[daddyduck]

wk
emaxx 16.8 motor
hpi blitz tires
bushwacker body
$1.00 gator

 

[Slow_Joe]

Far from a crawler but still 1 of the most fun trucks around. My 5 year-old finished destroying the stock body so I painted here a nice new purple one. Added some HPI 5 Stars and some Proline tires and it looks better than new "thumbsup"

 

[GMV]

My crawler converted wk.
Stretched to 13,5" wb.
Upperlinks converted from stock 3 link to 4 link setup.
Chopped frame.
RC4WD steel tranny gears w/14T pinion.
Integy 65T lathe motor.
ESavage driveshafts.
MT2 HD steel ring and piniongear
Integy casterblocks and knuckles
STRC rear lockout's
Holmes hobbies BR-XL ESC
3S lipo
Axle mounted Hitec 14kg servo
HPI savage Ford F-150 body.
Modified body mounts to fit the body as low as possible.
Weighted MIR ENG beadlocks.
HB Sedona's

 

[wanantrdsc]

Wip

 

[Evandiego]

My Stealth King Crawler. Proline Crowd Pleazer body with Gun Metal and Black paint. Used a Flat Clear on the outside. :ror:

 

[Rataplan]

here's my beetle king

 

[rcfreak363]

finally got mine

first thing i did was remove the brace, the replace the stock servo saver with one that is much stronger, the stock one broke 15 minuets into the first run