• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

Wheely King Crawler Picture Archive

JasonInAugusta

06 Super National Champ
Moderator
Joined
Jun 20, 2004
Messages
11,361
Location
Stark Industries Bar and Grill
Ok here's the deal guys, if you would like to submit a picture of your truck you can do so here. There are some rules, so allow me to bold these so you read them :lol:


  • Pictures must not be any larger than 800x600
  • You may only submit ONE picture of your truck
  • Your truck must be complete, no poser shots of your truck without driveshafts, or shocks, or the chassis sitting on a spray can
  • You may link to a thread about your truck and you may link to a site containing more pictures
  • Do NOT list out addresses to individual pictures
  • If you would like to change your truck's picture, please edit your post accordingly
  • Please post a build thread for your rig. This will reduce chit-chat in this thread and give folks a reference point for info on your rig.
  • Anyone not following these rules will have the rules enforced onto their post as the mods see fit, ie: removing excess pictures, deleting multiple links, deleting of the entire post if too many rules are being broken for us to simply edit the post

The main thing here is we want to show off your trucks, but we don't want people suffering with long load times to get the pics up. We also don't want rccrawler's bandwidth to go down the toilet. Not everyone is running monitors at 1600x1200, so small pictures are appreciated.

Thank you and post away!
 
Last edited:
I'll get things started:

First up is the OG Wheely King crawler, Ralph.

  • Novak Crawler System
  • TXT Transmission
  • Revo Driveshafts
  • Airtronics 94359Z servo
  • Rear RPM Revolvers
  • Imex 2.2 All-Terrains
  • Rock rings by 62pyro
  • 1/4" 4130 chromoly frame by rckjeep
  • Hood from HPI Rubicon, .030" side panels

Build thread: http://www.rccrawler.com/forum/showthread.php?t=53677
 

Attachments

  • 3.jpg
    3.jpg
    90.4 KB · Views: 40,701
Last edited:
Dad's Scorpion King

  • Mamba 25
  • Park 450
  • Wheely Kng Transmission
  • Revo Driveshafts
  • JR 8611A servo
  • Front RPM Revolvers
  • Imex 2.2 All-Terrains
  • Rock rings by Montana Scale Designs
  • 3/16" steel frame
  • Aluminum seat, interior tub, and body panels

Build thread: http://www.rccrawler.com/forum/showthread.php?t=56702

8.jpg
 
Last edited:
here is my wk crawler
novak fifty five crawl motor
t-maxx drive shafts
revo rods for the 4 link
narrowed stock wheels
narrowed maxx mashers


DSC00882.jpg


IMGP0838.jpg
 
Last edited:
Here is my Wheely King project. It is mostly stock other than stretched with my own custom links, and an Integy 55T motor. I borrowed the 2.2 Swamp Dawgs with RC4WD beadlocks from my F-350 since I was playing with the WK wheels/tires on my F-350 for a bit. I had to make drive shafts out of junk in my garage untill my T-Maxx ones show up, but they seem to be holding up to my suprise!...

4c241oh.jpg
 
THE Wheely King

Well after the Boyer Tuber was a crawling failure I tore it a part. Using the WK tranny and axles I made this truck. I hope you all like it. This was a cheap and simple build other than the electronics and motor.
001-3.jpg
 
night crawler 4 links drive shafts and 93 spur gear ever thing else is stock

DSC00876.jpg

wk axles locked
wk trans
revo shafts + 3/4 inch to back
55t motor 96/15
12.5" length
12.5" width
:flipoff:
 
Last edited:
Mamba 25
AXI 2808
2100 3 cell LiPo Battery
Wheely King Transmission
Maxx CVD's in rear axle
645mg servos
Narrowed Max Mashers
4 oz airsoft BB's in each tire
13 3/8" WB
10 3/4" track

P4130001.JPG
 
Work In Progress

  • hpi 96t spur
  • custom lower shock mounts and moved top mounts
  • steel steering links
  • Stretched to about 13.5" with traxxas links and TLT top mounts
  • JR 126MG servo on a custom mount
  • EMAXX drivelines
  • Tekin Rebel ESC
  • integy 55 turn
  • The rest is stock
To see more visit my thread:)
http://www.rccrawler.com/forum/showthread.php?t=69210
 

Attachments

  • DSC00041.JPG
    DSC00041.JPG
    15.1 KB · Views: 34,627
Last edited:
My Rubi WK2-3L

Usual running gear
 

Attachments

  • DSC02857.JPG
    DSC02857.JPG
    88.5 KB · Views: 34,595
took it out for testing after build. few things will change on it now to this

gearing - 14/93
stretched to 12.5" wheelbase
60/40 links with hpi ball ends/440 thread
HPI WK aluminum shocks
holmes revolver 2
pheonix 25 esc
2-cell 2100 li-po battery
moab 2000 tires on narrowed hpi rims


April2007025.jpg
 
Last edited by a moderator:
WK Comp Crawler

Here is a shot of my (untested) competition WK crawler.
I'll post pics in another thread after I know if it works or not.

BMV - inspired chassis design
Stampede tranny (will be replaced with a XXX-T next week)
Super Rooster ESC
Airtronics 94358 Servo
Integy 55T
Airtronics M-8
M2K's on single narrowed Stampede wheels

**EDIT** More pics can be found here: http://www.rccrawler.com/forum/showthread.php?t=70404

wk_2.JPG
 
Last edited:
Back
Top