Where is wheel base measured from?

[InFlames]

As the title says. I am going to make my own chassis, and i was achieve 12.5 wheel base with custom links, but i am designing the chassis around the stock links so i hope to get maybe 12" wheel base with stock links....Ive also seen those jigs people make, like where the bolt the axles to a piece of angle and go from there, is wheel base measured from axle nut to axle nut? Any help would be appreciated...."thumbsup"

 

[JasonJones]

http://www.usrcca.com/rules2008.pdf is the official rules, it oulines all the measurements etc.

Its measured from Axle Stub to Axle Stub.

 

[InFlames]

http://www.usrcca.com/rules2008.pdf is the official rules, it oulines all the measurements etc.

Its measured from Axle Stub to Axle Stub.

Thanks for the help, but im kind of a n00b, by axle stub you mean what the wheel bolts to right?

 

[BigB_117]

yeah, the axle shaft that goes through the center of the wheel, measure from the center of each one.

 

[InFlames]

yeah, the axle shaft that goes through the center of the wheel, measure from the center of each one.

Alright cool, thanks. "thumbsup"