Xr10 motor skid plates

[xr10greener]

Looking to build a set of motor skid plates if anyone has any ideas or has done it before let me know. Thanks!

 

[1r3land]

Looking to build a set of motor skid plates if anyone has any ideas or has done it before let me know. Thanks!

Search winnerone23 ( Troy) and get some of his sweet carbon fiber motor guards!!
Tight fit and great for the job! You won't be disappointed !!

 

[xr10greener]

Those are sick!! Will have to try and get a set for sure!! Thanks!

 

[1r3land]

Those are sick!! Will have to try and get a set for sure!! Thanks!

Yea they are.
Look great!
Shoot him a PM and he can get you hooked up!

 

[winnerone23]

Thanks for the good word Kenny...
That's ridiculous how the CF and the green simply POP each other for color!

Awaiting material for the next batch of motor guards. Pm me to get in for some. Thanks

 

[Charlie-III]

CF is a good vendor for one type of motor protector.
BWD did a nice one, not sure if they're still available.
Some people have used:
-35mm film canister
-pill bottles
-thin Delrin sheet wrapped around the motor and held on with double stick tape.
-other methods

 

[jaloos]

Have to agree here as well, got me a set of the guards and I love them. Esp the idea of being able to take them off without pulling the motor as with the delrin based ones out there.

 

[jaloos]

CF is a good vendor for one type of motor protector.
BWD did a nice one, not sure if they're still available.
Some people have used:
-35mm film canister
-pill bottles
-thin Delrin sheet wrapped around the motor and held on with double stick tape.
-other methods

Yup have used most of the methods mentioned as well. I have found some plastic pipe wrap used for covering insulated pipes and it works well too.

 

[cboggs]

5 hour energy bottles also work great with a little trimming.