TrailDawg362
RCC Addict
Two thumbs up for this one. "thumbsup""thumbsup".
-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
Zohn addiction fed by vs4-10
- Thread starter zohn
- Start date
zohn
Rock Stacker
We can rebuild him, make him stronger, shorter, able to fit in a ..... wait a minute that's Steve not bruce.
Getting bored waiting for paint to dry.
Shot PS-48 on the bottom half and killing bruce err time before backing it up with PS-5.
Gonna glue those thigh steaks to bruce so he looks a little better insitue.
Should have body painted by end of day.
Thx traildawg
Sent from my SM-G950U using Tapatalk
Getting bored waiting for paint to dry.
Shot PS-48 on the bottom half and killing bruce err time before backing it up with PS-5.
Gonna glue those thigh steaks to bruce so he looks a little better insitue.
Should have body painted by end of day.
Thx traildawg
Sent from my SM-G950U using Tapatalk
2mtech
RCC Addict
Hey, I dismember that guy too! Looks like you've got the $6 man now.
You using a hair dryer? I never wait for paint to dry.
You using a hair dryer? I never wait for paint to dry.
zohn
Rock Stacker
No I put it in front of a fan for half hour between coats.
Almost done painting. Shot the blue a couple times. Still need to back the PS-59 with black and peel the outer film and I should be done.
Body drying silver
Blue
Sent from my SM-G950U using Tapatalk
Almost done painting. Shot the blue a couple times. Still need to back the PS-59 with black and peel the outer film and I should be done.
Body drying silver
Blue
Sent from my SM-G950U using Tapatalk
zohn
Rock Stacker
Got the body painted up.
Turned out ok. That PS-48 is kinda of a pain to spray.
Waiting on lights and rims to arrive.
Got my electronics up and running today. Took a bit to figure out how to bind my new rx to TX but once I figured that out it went smooth.
Need to plug into my castle link when I get home to fine tune my mamba x.
This thing has got some zip on 3s and stock pinion, think I need to drop a few teeth.
Sent from my SM-G950U using Tapatalk
Turned out ok. That PS-48 is kinda of a pain to spray.
Waiting on lights and rims to arrive.
Got my electronics up and running today. Took a bit to figure out how to bind my new rx to TX but once I figured that out it went smooth.
Need to plug into my castle link when I get home to fine tune my mamba x.
This thing has got some zip on 3s and stock pinion, think I need to drop a few teeth.
Sent from my SM-G950U using Tapatalk
mikemcE
I wanna be Dave
I likee !!!!!!
The amber signals are an eye catcher !
Hang up and Drive
The amber signals are an eye catcher !
Hang up and Drive
Topher Builds
I wanna be Dave
Looks awesome Zohn! Those front marker lights are sweet.
2mtech
RCC Addict
Sure looks good!!
Bruce the halfling looks right at home too.
Bruce the halfling looks right at home too.
Topher Builds
I wanna be Dave
No radiator? I like that grill better than the stock one too
zohn
Rock Stacker
thanks guys. I still need to do something with that black front grill, so more to come...
zohn
Rock Stacker
I'm going to open the stock pieces middle section, paint it silver and add stainless steel mesh to scout it up some more. I'll add the radiator once I'm done if it can still be seen thru the mesh.
Sent from my SM-G950U using Tapatalk
Sent from my SM-G950U using Tapatalk
Beautiful work, I love the color combo!
zohn
Rock Stacker
Got a grease splatter screen at the home store and made it a grill.
Sent from my SM-G950U using Tapatalk
Sent from my SM-G950U using Tapatalk
zohn
Rock Stacker
Sent from my SM-G950U using Tapatalk
mikemcE
I wanna be Dave
Honest..... nah just looks like..... screen. Add 4 horizontal black bars.....that might work ?
Hang up and Drive
Hang up and Drive
zohn
Rock Stacker
i agree its not that attractive a look. my dads scout did have a chrome mesh grill with only the international emblem (the long all caps rectangular red logo).
this material is actually perforated aluminum, I may try to burnish and buff another piece and try again.
this material is actually perforated aluminum, I may try to burnish and buff another piece and try again.
mikemcE
I wanna be Dave
It’s hard to do that in scale. It gets even worse if you go to smaller scale like1/24.
Hang up and Drive
Hang up and Drive
Topher Builds
I wanna be Dave
Having a tough time deciding which I like more, between the black grill and the painted one with the mesh. I really like that it matches your dads 1:1, an emblem could tie the room together, and break up all that silver.
zohn
Rock Stacker
Got my sister recruited to make some 1/10 scale IH logo decals so should have a grill badge soon.
Spent the afternoon chopping up my rc lighthouse LEDs, installing them in the body, tying them in with my signal lights dash lights and CB light. Used a load of shrink tube.
Also got the vxt's mounted to my ssd 5slots and mounted on my vs4-10.
Getting close to taking it out and scratching it up!
Sent from my SM-G950U using Tapatalk
Spent the afternoon chopping up my rc lighthouse LEDs, installing them in the body, tying them in with my signal lights dash lights and CB light. Used a load of shrink tube.
Also got the vxt's mounted to my ssd 5slots and mounted on my vs4-10.
Getting close to taking it out and scratching it up!
Sent from my SM-G950U using Tapatalk