04-29-2010, 09:37 PM | #1 |
Quarry Creeper Join Date: Jun 2009 Location: Tri-Cities
Posts: 309
| 1.55 Chevy "Mac" Build
specs (so far) axial axles axial trans custom steel tube frame Scaleish blue shocks 645mg Servo xl-5 slash 12t motor mip shafts hope to get some 1.55 rock stompers and white steel wheels soon.. went to lowes today and got some sq tubing... let the build begin Will have pics later |
Sponsored Links | |
05-01-2010, 03:38 PM | #2 |
Quarry Creeper Join Date: Jun 2009 Location: Tri-Cities
Posts: 309
|
got a little work done today one side of the chassis is done, hope to have the other side done before too long. |
05-04-2010, 10:33 PM | #3 |
Rock Stacker Join Date: Jul 2008 Location: Redmond, Oregon
Posts: 69
|
what a tease!
|
05-05-2010, 09:32 AM | #4 |
Quarry Creeper Join Date: Jun 2009 Location: Tri-Cities
Posts: 309
| little update.. traded some sedonas for rc4wd 1.55 original beadlocks. bought some axles with leafs and shocks and a set of 1.55 rock stompers so that should be in by the end of the week. hoping to get it rolling by next week. still looking for a clod body. |
05-06-2010, 08:46 PM | #5 |
Quarry Creeper Join Date: Jun 2009 Location: Tri-Cities
Posts: 309
|
got a few things done today some axles showed up, wheels and i made a chassis.. Very similar in shape, all the mounting holes line up perfectly tires should be showing up any day. |
05-08-2010, 03:47 PM | #6 |
Quarry Creeper Join Date: Jun 2009 Location: Tri-Cities
Posts: 309
|
since i havent had any updates in awhile, i thought id post some progress pics. i brazed some cross braces in and got the tranny mounted. the leafs work perfect with this chassis tires showed up about noon today, these things are very scale to the TSL's. threw some electronics on it just for testing... hoping to buy a body within a few weeks or so. |
05-13-2010, 11:43 PM | #7 |
Quarry Creeper Join Date: Jun 2009 Location: Tri-Cities
Posts: 309
|
few updates.. i plan on running the rear 4-linked and a sway bar in the front. i started a 4-link truss and grooved the rock stompers to look more like tsl's i plan on doing a bumper somewhat like this one, aswell as running a 3r winch. any ideas for a rear bumper? |
05-14-2010, 08:46 AM | #8 |
RCC Addict Join Date: Apr 2007 Location: Murfreesboro
Posts: 1,537
|
Lookin good so far! Look forward to seein what you have planned body wise! Matt |
05-14-2010, 09:47 AM | #9 |
Quarry Creeper Join Date: Aug 2009 Location: here
Posts: 344
|
Your shackle angle looks off on the rears. Should be around a 45* angle, the other way. |
05-14-2010, 09:04 PM | #10 |
Quarry Creeper Join Date: Jun 2009 Location: Tri-Cities
Posts: 309
|
i needed to extend the WB to 11.4'' for the clod body but didnt have enough chassis in the rear to run the leafs.. so i built some shock hoops and 4-linked it. i finished the 4-link truss aswell. |
05-18-2010, 07:49 PM | #11 |
Quarry Creeper Join Date: Jun 2009 Location: Tri-Cities
Posts: 309
|
body showed up today... man this thing is sweet. plan on doing body mounts and extending the frame so i can run leafs in the rear again. |
05-18-2010, 09:15 PM | #12 |
Pebble Pounder Join Date: May 2008 Location: El Monte
Posts: 177
|
legit.......lovin the 80s paint bro!!
|
05-20-2010, 05:37 PM | #13 |
Quarry Creeper Join Date: Jun 2009 Location: Tri-Cities
Posts: 309
|
i got started on some rock slider but my back started hurting so i went inside.. i think they turned out nice so far, what do you guys think. |
05-20-2010, 10:06 PM | #14 |
Quarry Creeper Join Date: Jun 2009 Location: Tri-Cities
Posts: 309
|
finished up the rest of the rock sliders.... i think they turned out really good |
05-20-2010, 10:21 PM | #15 |
Quarry Creeper Join Date: Dec 2007 Location: H.B.
Posts: 432
|
Nice job on the rig, and GREAT job on siping the tires!
|
05-21-2010, 01:52 AM | #16 |
Quarry Creeper Join Date: Feb 2010 Location: melbourne
Posts: 215
|
I only wish the lugs on those tires were taller like the slingers to really make em look scale
|
05-22-2010, 03:00 PM | #17 |
Quarry Creeper Join Date: Jun 2009 Location: Tri-Cities
Posts: 309
|
i decided to go with a scx chassis.. my old chassis work ok, but i forgot the pre-drill the holes before i cut it in half so none of the mounting holes really lined up. i started mounting the rock sliders and got one side done, working on the others right now. got the body all mounted up and the chassis mounted servo done. sorry for the bad phone pics |
05-27-2010, 11:28 PM | #18 |
Quarry Creeper Join Date: Jun 2009 Location: Tri-Cities
Posts: 309
|
i ordered a winch from rpp a few days ago and it just came in.. very fast shipping. the front hilift shocks weren't slow enough for my liking and since they are airshocks, you cant add heavier weight oil to them..... so i added another set of shocks and put some 25wt oil in. finished the other rock slider and started on the bumper (no pics yet) bought a used 5955 hitec servo and is working great so far. started sanding the hood and sides a little but it got late and i was tired.. i think ill move the rear red shocks to the front and swap with the blue ones so there arent 2 different colored shocks up front.. |
05-27-2010, 11:43 PM | #19 |
Rock Stacker Join Date: Apr 2010 Location: Philadelphia
Posts: 69
|
Looking good! What leaf springs are you using? Fran |
05-28-2010, 08:57 PM | #20 |
Quarry Creeper Join Date: Jun 2009 Location: Tri-Cities
Posts: 309
| |
| |