RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   1.5 Scale Rigs (http://www.rccrawler.com/forum/1-5-scale-rigs/)
-   -   55' willys pickup ( body built by pardonmyn00b) (http://www.rccrawler.com/forum/1-5-scale-rigs/361328-55-willys-pickup-body-built-pardonmyn00b.html)

scale4x4 01-21-2012 04:02 PM

55' willys pickup ( body built by pardonmyn00b)
 
Heres my some-what build thread on this rig. its more to just document my progress then an actual build thread. I got this body back in sept. and it sat for a few months while I was debating on what to do with it, then i saw mattstangs roller for sale and jumped on it, as it will be a great base for this rig.

Currently I have most of the interior done, still needs to be painted and detailed, and the front bumper is almost done. Interior took the most time, i got the bumper done in an hour or so. its 1/2" angle and 1/8" plate. plenty of room for winch mounting( hopefully an MSD quicksand) http://www.eparccrawlers.com/forums/...on_twisted.gif .

Got my servo mount done, just haven't taken any pics of that yet.

I plan on doing a flatbed, i'll get that done when all the body work is complete.

Keep in mind, everything is in primer, this is not the final color. I'm thinking a beige/white combo. But nothing is set in stone.

Currently has yota axles, killer T-case, MIP driveshafts.

running gear will most likely be a Hitec 645 MG servo, sidewinder esc, 3s lipo( if i can fit one) and some type of trans, need something small enough, and i haven't found one yet.


Anyway, enough with my yapping, heres some pics,
http://i447.photobucket.com/albums/q...llysbuild6.jpg

http://i447.photobucket.com/albums/q...llysbuild4.jpg

Bumper,
http://i447.photobucket.com/albums/q...llysbuild3.jpg


Interior, like i said, its not done, still needs alot of work,
http://i447.photobucket.com/albums/q...illysbuild.jpg

http://i447.photobucket.com/albums/q...llysbuild2.jpg



Any comments or suggestions are appreciated. Thanks

scale4x4 01-21-2012 04:50 PM

Re: 55' willys( body built by pardonmyn00b)
 
Thanks, heres another pic of my micro willys next to his big brother :)( this was before i primed and did body work on the 1/10th scale willys)

http://i447.photobucket.com/albums/q...owillys5-1.jpg

http://i447.photobucket.com/albums/q...owillys3-1.jpg

http://i447.photobucket.com/albums/q...rowillys-1.jpg

http://i447.photobucket.com/albums/q...owillys4-1.jpg

scale4x4 01-22-2012 03:23 PM

Re: 55' willys( body built by pardonmyn00b)
 
small update, built the servo mount today, real simple, just a couple of peices of 1/8" plate welded together. works good. sorry for the crappy cell phone pictures, ill take better ones when I get my camera back, (servo is for mock-up purposes only)

http://i447.photobucket.com/albums/q...ysbuild2-1.jpg

http://i447.photobucket.com/albums/q...lysbuild-1.jpg

scale4x4 01-23-2012 05:21 PM

Re: 55' willys( body built by pardonmyn00b)
 
did some work on the interior, added carpet, i've also made a bench seat, with memory foam cushions wrapped in 100% genuine cow hide leather:shock: pics of that soon. heres a pic of the sloor pan with carpet,

http://i447.photobucket.com/albums/q...tinterior3.jpg

http://i447.photobucket.com/albums/q...etinterior.jpg

scale4x4 01-23-2012 08:49 PM

Re: 55' willys( body built by pardonmyn00b)
 
Heres a few pictures of the seat, memory foam cushions, wrapped in leather. note, the seat is just mocked up for pics, and its not done, seams still need to be finished, and i might hit it with the airbrush to give it a more uniform color.

http://i447.photobucket.com/albums/q...benchseat3.jpg
http://i447.photobucket.com/albums/q...benchseat2.jpg
http://i447.photobucket.com/albums/q...benchseat4.jpg

scale4x4 01-26-2012 10:07 AM

Re: 55' willys( body built by pardonmyn00b)
 
oh, i didnt have a place to put the seat base down to primer it, so i held it in my hand,which is why i look dead Lol

scale4x4 01-31-2012 06:57 PM

Re: 55' willys pickup ( body built by pardonmyn00b)
 
UPDATE


Body and interior are FINISHED!


Sorry for the Horrible pics, I couldn't get the camera to take pics of the interior so i had to use flash, which screwed the pics up, but hey, there better than nothing Lol

I made windows from .015 clear styrene, the drive's side doesnt have a window, and the windshield is removable,

http://i447.photobucket.com/albums/q...shedwillys.jpg

http://i447.photobucket.com/albums/q.../finished3.jpg

http://i447.photobucket.com/albums/q...hedwillys4.jpg

http://i447.photobucket.com/albums/q...hedwillys2.jpg

old man 52 01-31-2012 07:08 PM

Re: 55' willys pickup ( body built by pardonmyn00b)
 
This is coming along very nice, keep up the good work. "thumbsup"

scale4x4 01-31-2012 07:09 PM

Re: 55' willys pickup ( body built by pardonmyn00b)
 
Thank you! Also, just realised it in the last pic, thats not a crack in the window, its a strand of shoe goo, its gone now. lol.

old man 52 01-31-2012 07:15 PM

Re: 55' willys pickup ( body built by pardonmyn00b)
 
Should have left it, it looked like a cobb webb.

scale4x4 02-01-2012 11:00 AM

Re: 55' willys pickup ( body built by pardonmyn00b)
 
Hope these are better,

http://i447.photobucket.com/albums/q...sinterior6.jpg
http://i447.photobucket.com/albums/q...sinterior5.jpg
http://i447.photobucket.com/albums/q...sinterior2.jpg

Its hard to get pictures with the glare of the window,
http://i447.photobucket.com/albums/q...sinterior3.jpg
http://i447.photobucket.com/albums/q...sinterior9.jpg
http://i447.photobucket.com/albums/q...interior10.jpg


the back of the seat is removable,
http://i447.photobucket.com/albums/q...sinterior8.jpg
http://i447.photobucket.com/albums/q...sinterior7.jpg
http://i447.photobucket.com/albums/q...ysinterior.jpg

http://i447.photobucket.com/albums/q...interior11.jpg
http://i447.photobucket.com/albums/q...interior12.jpg

sally1800 02-01-2012 11:23 AM

Re: 55' willys pickup ( body built by pardonmyn00b)
 
Looks Great.

scale4x4 02-01-2012 06:14 PM

Re: 55' willys pickup ( body built by pardonmyn00b)
 
Quote:

Originally Posted by saydee1800 (Post 3540069)
Looks Great.


Thank you "thumbsup"

091tck 02-02-2012 07:57 AM

Re: 55' willys pickup ( body built by pardonmyn00b)
 
gunna be a great rig

scale4x4 02-03-2012 08:13 PM

Re: 55' willys pickup ( body built by pardonmyn00b)
 
small update, painted the bumper and servo mount black, also put the body on real quick to see how she fits, keep in mind the back of the body is goin to be raised another 3/16" or so to level the cab out, still waiting on my screws for the beadlocks to i can get the tires mounted, only been a month :roll: sorry for the low quality pics, ill get better ones soon, and hopefully with wheels on the rig :lmao: also built fender wells, havent installed those yet though.




http://i447.photobucket.com/albums/q...tedbumper4.jpg

http://i447.photobucket.com/albums/q...tedbumper3.jpg

http://i447.photobucket.com/albums/q...ntedbumper.jpg

http://i447.photobucket.com/albums/q...tedbumper2.jpg

scale4x4 02-13-2012 11:46 AM

Re: 55' willys pickup ( body built by pardonmyn00b)
 
Geez, 2nd page already? damn i'm slow :ror:

Anyway, Not much has happened since the last update, made some simple fender wells, screws finally arrived, so got the tires and wheels mounted, so finally, shes a roller I guess.

Also cut every other lug out of the slingers, and mounted the wheels "backwards" so there more of a "deep dish" style rim, I like them.

Here are some poser shots,

http://i447.photobucket.com/albums/q...lysupdate4.jpg
http://i447.photobucket.com/albums/q...lysupdate3.jpg
http://i447.photobucket.com/albums/q...ysupdate12.jpg
http://i447.photobucket.com/albums/q...lysupdate5.jpg



Here's a pic of the "deep dish" style, kind of hard to see,
http://i447.photobucket.com/albums/q...lysupdate9.jpg


And heres a shot of the fender wells, real simple,
http://i447.photobucket.com/albums/q...lysupdate7.jpg
http://i447.photobucket.com/albums/q...lysupdate8.jpg

Bananaclip 02-13-2012 11:49 AM

Re: 55' willys pickup ( body built by pardonmyn00b)
 
looking fantastic

scale4x4 02-13-2012 11:56 AM

Re: 55' willys pickup ( body built by pardonmyn00b)
 
Thank you! Ha, just looked at your build thread and saw you mounted your wheels the same way! I like them alot better that way.

scale4x4 02-14-2012 11:07 AM

Re: 55' willys pickup ( body built by pardonmyn00b)
 
every rig needs a muffler "thumbsup"

http://i447.photobucket.com/albums/q...8/muffler3.jpg
http://i447.photobucket.com/albums/q...08/muffler.jpg
http://i447.photobucket.com/albums/q...8/muffler2.jpg

scale4x4 02-14-2012 02:38 PM

Re: 55' willys pickup ( body built by pardonmyn00b)
 
Here are some better shots of the muffler,
http://i447.photobucket.com/albums/q...ewmuffler5.jpg
http://i447.photobucket.com/albums/q...ewmuffler2.jpg
http://i447.photobucket.com/albums/q...ewmuffler4.jpg


And looky at what just came :) (keep in mind, its not painted yet)

http://i447.photobucket.com/albums/q...ewmuffler3.jpg


All times are GMT -6. The time now is 05:08 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com