|
| LinkBack | Thread Tools | Display Modes |
11-17-2015, 02:54 PM | #41 |
Quarry Creeper Join Date: Jun 2010 Location: Vienna, Austria
Posts: 246
| Re: daniels needs a home for a 500kv ROC 412 or Suzuki Jimney goes RECON G6
Installed the active locker from rcmart in reimforced gears and put the gearbox together with greased h-speed bearings and all m3 screws. The mod I did with thw new screw works perfect! |
Sponsored Links | |
11-19-2015, 01:52 PM | #42 |
Quarry Creeper Join Date: Sep 2007 Location: Hancock MD
Posts: 202
| Re: daniels needs a home for a 500kv ROC 412 or Suzuki Jimney goes RECON G6
that should help a bit for traction, though it seems more like a spool than a locker. Have you done any traction aids in the front yet? I dont like locked fronts and usually just do a limit slip, I have been telling people about this mod using macks swimming ear plugs in the diff, they are 100% silicone and dont hurt the gears while still allowing some slip so the truck can turn better than locked.
|
11-19-2015, 03:21 PM | #43 | |
Quarry Creeper Join Date: Jun 2010 Location: Vienna, Austria
Posts: 246
| Re: daniels needs a home for a 500kv ROC 412 or Suzuki Jimney goes RECON G6 Quote:
I prefer to run both diffs locked - for Austrian/Hungarian and RECON G6 events it is the way to go. | |
11-20-2015, 01:58 AM | #44 |
Quarry Creeper Join Date: Jun 2010 Location: Vienna, Austria
Posts: 246
| Re: daniels needs a home for a 500kv ROC 412 or Suzuki Jimney goes RECON G6
Mounting carbon reinforced arms and stainless shafts!
|
11-20-2015, 02:56 AM | #45 |
Quarry Creeper Join Date: Jun 2010 Location: Vienna, Austria
Posts: 246
| Re: daniels needs a home for a 500kv ROC 412 or Suzuki Jimney goes RECON G6
An relocating the upper arm to allow for more movement!
|
11-20-2015, 02:58 PM | #46 |
Quarry Creeper Join Date: Jun 2010 Location: Vienna, Austria
Posts: 246
| Re: daniels needs a home for a 500kv ROC 412 or Suzuki Jimney goes RECON G6
A detail picture showing the chassis modification in the front! The teardown is finished - reassembly in progress! |
11-20-2015, 03:36 PM | #47 |
Quarry Creeper Join Date: Jun 2010 Location: Vienna, Austria
Posts: 246
| Re: daniels needs a home for a 500kv ROC 412 or Suzuki Jimney goes RECON G6
The frontend is back together - softer springs - aluminum knuckles and trialpsycho prototype steering link!
|
11-21-2015, 06:09 PM | #48 |
Quarry Creeper Join Date: Jun 2010 Location: Vienna, Austria
Posts: 246
| Re: daniels needs a home for a 500kv ROC 412 or Suzuki Jimney goes RECON G6
The car is back on wheels - still plenty todo - enjoy the pics.
|
11-22-2015, 10:57 PM | #49 |
Quarry Creeper Join Date: Oct 2014 Location: Baltimore
Posts: 234
| Re: daniels needs a home for a 500kv ROC 412 or Suzuki Jimney goes RECON G6
It's like two tiny trucks got together and made...a tinier truck.
|
11-27-2015, 11:36 AM | #50 |
Quarry Creeper Join Date: Jun 2010 Location: Vienna, Austria
Posts: 246
| Re: daniels needs a home for a 500kv ROC 412 or Suzuki Jimney goes RECON G6
More parts arrived the build can continue!
|
11-27-2015, 04:30 PM | #51 |
Quarry Creeper Join Date: Jun 2010 Location: Vienna, Austria
Posts: 246
| Re: daniels needs a home for a 500kv ROC 412 or Suzuki Jimney goes RECON G6
Hello, It is working again - have some issues with the pinion - spur - hoppe they are solved now! The steering is perfect - climbing improved a lot with the weight changes. About 130 g of balast in thw front wheela and bumper. |
11-28-2015, 02:14 AM | #52 |
Quarry Creeper Join Date: Jun 2010 Location: Vienna, Austria
Posts: 246
| Re: daniels needs a home for a 500kv ROC 412 or Suzuki Jimney goes RECON G6
Lot's of clearance in the middle of the car! The steering is well hidden but accesible! |
11-30-2015, 04:16 PM | #53 |
Quarry Creeper Join Date: Jun 2010 Location: Vienna, Austria
Posts: 246
| Re: daniels needs a home for a 500kv ROC 412 or Suzuki Jimney goes RECON G6
Tried to build a 'remote' for the lockeduprc freespool winch - will see how this works in the real world!
|
12-01-2015, 03:05 AM | #54 |
Quarry Creeper Join Date: Jun 2010 Location: Vienna, Austria
Posts: 246
| Re: daniels needs a home for a 500kv ROC 412 or Suzuki Jimney goes RECON G6
The RECON G6 Birth Day Bash is right around the corner so it was time to finish the car! Mounted the HPI Cage and Drivers in the Body - and uses some scrap Lexan to make the rear nice aswell! From another scrap part of Lexan I fabed a very light roof carrier to transport my Sandladders. Cheers Daniel |
12-01-2015, 05:03 PM | #55 |
Pebble Pounder Join Date: Jul 2008 Location: Denver
Posts: 148
| Re: daniels needs a home for a 500kv ROC 412 or Suzuki Jimney goes RECON G6
This rig is looking sweet, loving your creativity and ideas wrenching on a Tamiya vehicle. Wondering if you have considered shaving those arms? They look to be universal from left to right, and has nubs or mounting holes for the shocks on both sides, resulting in an unused hole on the bottom(circled in green). They look to hang down a bit, possibly something that would hang up on obstacles? Every bit of ground clearance helps! Have fun and I hope you complete the G6!! |
12-02-2015, 01:17 AM | #56 | |
Quarry Creeper Join Date: Jun 2010 Location: Vienna, Austria
Posts: 246
| Re: daniels needs a home for a 500kv ROC 412 or Suzuki Jimney goes RECON G6 Quote:
This change is on my list of Todo's - but I will leave in less than 24 hours and don't know if I will be able to change it. At one point I was hoping to use the second hole for long shocks - but that is impossible and obsolote now. | |
12-03-2015, 04:04 AM | #57 |
Newbie Join Date: Feb 2012 Location: Wollongong NSW Australia
Posts: 32
| Re: daniels needs a home for a 500kv ROC 412 or Suzuki Jimney goes RECON G6 |
12-03-2015, 11:17 PM | #58 |
Quarry Creeper Join Date: Jun 2010 Location: Vienna, Austria
Posts: 246
| Re: daniels needs a home for a 500kv ROC 412 or Suzuki Jimney goes RECON G6
The jimny and I arrived in Reno for the RECON G6
|
12-04-2015, 12:00 AM | #59 |
Quarry Creeper Join Date: Jun 2010 Location: Vienna, Austria
Posts: 246
| Re: daniels needs a home for a 500kv ROC 412 or Suzuki Jimney goes RECON G6
While DRIVNMF is doing his thing I finally had time to mount the plastic rocksliders i prepared back in Austria!
|
12-04-2015, 12:18 AM | #60 |
Rock Crawler Join Date: Feb 2015 Location: Melbourne
Posts: 639
| Re: daniels needs a home for a 500kv ROC 412 or Suzuki Jimney goes RECON G6
Love this build. Makes me want one.
|
daniels needs a home for a 500kv ROC 412 or Suzuki Jimney goes RECON G6 - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Roc 412 gearing | Mudman02 | Axial Wraith | 4 | 11-16-2014 10:40 PM |
| |