RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   1.9 Scale Rigs (http://www.rccrawler.com/forum/1-9-scale-rigs/)
-   -   1.9 Willys Jeep Pickup project! (http://www.rccrawler.com/forum/1-9-scale-rigs/142232-1-9-willys-jeep-pickup-project.html)

F-150Highlift 10-30-2008 06:33 PM

1.9 Willys Jeep Pickup project!
This is just a teaser photo because I can't show you everything but I have always wanted to do this and now is the time. After looking at scratch builds on this site, I had to go through with it. All I can tell you right now is the body is styrene mostly, with a sign foam roof (easy to carve). It is going on my high lift, 11 inch wheelbase. The body is 100 percent scale but I did make the bed a little taller, looked better.I will add more pics as it comes along. Good things come to those who wait.





hotrodzuki21 10-30-2008 07:54 PM

ill buy one of these bodys if ull make it tell me how much lol

eddy4753 10-30-2008 10:31 PM

My dream come true. I will be following this one. "thumbsup"

nitrousrod 10-31-2008 07:37 AM

looks like 58 , if you come close to the drawing in the picture with your results you will have 1 bad ass P/U willys good luck cant wait to see it

jetboat 10-31-2008 08:08 AM

if it comes out good.... send that sucker to a body maker and pull some lexan versions.... Ill buy 2!!!

F-150Highlift 10-31-2008 09:49 AM

It looks like it should turn out very good. The only problems I am having is the cowl area and windshield pillars, but I have an idea that I will attempt tonight. I would love to mass produce it so everyone could have one.

STANG KILLA SS 10-31-2008 10:22 AM

enough with the crayons! bust out the styrene and x-acto!

jeepcj578 10-31-2008 03:23 PM


Originally Posted by jetboat (Post 1405536)
if it comes out good.... send that sucker to a body maker and pull some lexan versions.... Ill buy 2!!!

X2 i would buy atlest 2 mabey more for sure"thumbsup"

would not be hard to make a wagon out of it ether;-)

rckjeep 10-31-2008 03:30 PM

I'll be building a 1:1 Willy's soon. Nice work can't wait to see it.

F-150Highlift 10-31-2008 07:35 PM

Oh Cory, the crayons have been long gone. Here is another teaser, I can't show you this all at once, this is going to be my pride and joy so I'm taking the time to makes things correct. Here is the finished passenger side door for you to feast your eyes on.


F-150Highlift 11-05-2008 09:43 AM

Got the cab mostly done and the bed sides, made one rear fender last night too. Will post some pics tonight.

O.C.D. 11-05-2008 10:35 AM

I am pretty darn good at the Ol Styrene as well, but I have been limited to its strength at times. Is this going to be sturdy enough?

Do you think you lucked out on the lines being mostly straight and not angular?

Just curious as I am debating building a scratch TJ for mine.

51WillysJeep 11-05-2008 11:04 AM

Hey Man, Awesome build idea you've got here ..! I've always liked the Willys pickup trucks too..! Obviously the door picture shows me you know what your doing with styrene, can't wait to see more progress..!!! "thumbsup"

F-150Highlift 11-05-2008 05:57 PM

These are some pics of the cab and bed. I have to still make a rear fender, floor and tailgate for the bed. Front end, fenders and hood should be done by the weekend I hope if I can put some time in it. Strength is great, reinforced all areas that were glued together from the inside.





pantablo 11-05-2008 06:12 PM

that is looking fantastic!

rcjeepbuilder 11-05-2008 07:05 PM

Your making it look easy!!!You have an eye for the details, please keep the pics comming.. thanks for sharing..

D.J.D.H. 11-05-2008 07:08 PM

looks great so far

jeepcj578 11-05-2008 09:25 PM

:shock:holy chit bob, i want one."thumbsup"
keep up the good work

Jeepial 11-05-2008 09:32 PM

Man,this thing is insane!!:shock: Where's the order form??:lol:

run2jeepn 11-06-2008 05:06 AM

Holy Crap... I'll be keeping my eye on this build for sure... Nice...:)

All times are GMT -6. The time now is 08:21 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com