Scattman's Lil' 1.9 G6/TTC Jeep

[Scattman]

Been running it for a few months now, figure it deserves it's own thread.

Specs..........

SCX-10 chassis (shortened front and rear a total of 1.5 inches)

4-linked frt and rear with delrin links

Axial axles with hardened R&P, alum. knucks and chubs

Axial tranny with alum. case and Robinson internals

Maxx shafts with drilled outputs on tranny

32 pitch gearing....... 11 tooth pinion, 56 tooth Duratrax spur

Currently running a 27 turn Checkpoint based motor on 4S lipo

RJSpeed Jeep body

3Racing winch on 3S lipo

1.9 TTC Claws on CAC ONE9 12 hole beadlocks

Modded Savage bumper on frt, modded RC4wd bumper on rear

ProLine roofrack with some scale goodies


Rig weighed in this weekend at 6.2 pounds and that was with a 4S 5000mah onboard. I can get it down to right around 5 lbs if I run the 3S 4000mah


Been wanting to try this RJSpeed body for a while, rig was built to fit it.





Need to shoot some body off pics but here are a few from this weekend.



Here the body was still holding some air, thought she was gonna roll over on me.










There is more than 1 way to make it past the mud hole....