RCCrawler Forums

Wild trial · 10-23-2007, 01:54 AM

Nice Sub. Mike.

YoUnG_vErSiOn · 10-25-2007, 01:53 AM

hey mike, hit me up when you get a chance homie!

marzzz23 · 10-25-2007, 08:45 PM

mike those are some great pics and video from Ringing Rocks, I can't wait to hit that place for some scaling in the spring or early summer when the leaves are gone. I think that place rules for scaling.

1BadJeepBruiser · 12-02-2007, 12:10 PM

1.9 rock stompers are sex...

Yea they look that good

Pics from this morning ^^

Pictures from yesterdays GTG

This truck is now officially done... I just need to get some new tire CA to glue them to the wheels

Norcal crawler · 12-02-2007, 12:17 PM

Those look awesome. Could you take a pic of then next to a geolander please? I want to see how much taller they are. Also, do they rub on the front fenders when you steer? If not did you clearance the fenders? Thanks a lot.

hairyguy4 · 12-02-2007, 12:28 PM

dam that is one sexy hilux

the stompers look sweet, how do they perform?

cammok5 · 12-02-2007, 12:33 PM

truck looks good with the stompers (and without)

i see you got a bit more snow then we did down in jersey.

Echodawg · 12-02-2007, 12:37 PM

Nice photos. Which wheels are those? Center cap? I'm about to give up trying to get these 1.9 Stompers mounted to the RC4WD beadlocks.

1BadJeepBruiser · 12-02-2007, 12:47 PM

Quote:

Originally Posted by Echodawg

Nice photos. Which wheels are those? Center cap? I'm about to give up trying to get these 1.9 Stompers mounted to the RC4WD beadlocks.

The rims are OG 1.9 Bruiser Builders, sadly they are no longer mad. They are my **favorite** 1.9 wheel. The center cap is from the Kyosho 4runners/pathfinders. I was trying to work with rc4wd to have them made, I guess ill have to talk with them again. There is a post in there section if you do search, post up if you want to see them

I know I do.

-Mike

1BadJeepBruiser · 12-02-2007, 12:53 PM

Quote:

Originally Posted by Norcal crawler

Those look awesome. Could you take a pic of then next to a geolander please? I want to see how much taller they are. Also, do they rub on the front fenders when you steer? If not did you clearance the fenders? Thanks a lot.

I can do that, I have some geos, I can tell you that they are slightly taller then the imex claw dawgs as I have some of the that are narrowed 2.2 still.

I dont think they rubbed the fender, although I didnt pay much attention. I just finally fixed the suspension on the front of this truck, now it actually works.

Quote:

Originally Posted by hairyguy4

dam that is one sexy hilux

the stompers look sweet, how do they perform?

They werent glued, so they spum some, but they worked pretty good otherwise, just the added height is a huge bonus.

Quote:

Originally Posted by cammok5

truck looks good with the stompers (and without)

i see you got a bit more snow then we did down in jersey.

yea I already was out plowing this morning

greasypete · 12-02-2007, 01:40 PM

What a perfect match these tires are . That first picture looks like 1:1 again.

and BTW, your snowplow is sick !!

Pete

ColquittCustom405 · 12-02-2007, 01:56 PM

I argee with everyone Mike. The second picture looks like a 1:1. Those tires look great on the clone....

obsession4x4 · 12-02-2007, 02:19 PM

Mike, congratulations!
The truck is 100% perfect, but if you want to make it 101% (!) perfect, than you should add two alu. axles (in my opinion two RCChannels.com axles).

YoUnG_vErSiOn · 12-02-2007, 02:26 PM

dude buy a blue star, this aint a commercial.

draven · 12-02-2007, 08:15 PM

Love it

You have Mad skilzs bro. :-P Buy the way what did ya do to the front end suspension too free it up?

1BadJeepBruiser · 12-02-2007, 10:07 PM

Quote:

Originally Posted by draven

Love it

You have Mad skilzs bro. :-P Buy the way what did ya do to the front end suspension too free it up?

actually I got rid of the rc4wd servo mounts, I have always used them but on this truck they were pushing the leaf mounts so far out, only on one side, that it actually made the axle stick further out on side

I think it was because it was powder coated in a textured coating which is pretty thick. so I took that out, and just drilled the cross member and used tlt servo mounts. Plus, me leafs are nicely worn in now. The front sags 15% or so just on the trucks own weight.

-Mike

ColquittCustom405 · 12-02-2007, 10:09 PM

Quote:

Originally Posted by 1BadJeepBruiser

Plus, me leafs are nicely worn in now. The front sags 15% or so just on the trucks own weight.

She's a fat girl..

draven · 12-03-2007, 03:33 PM

Yeah I had the same prob. with my rc4wd servo mounts so I took a fine dremel bit too them were the front leaf spring hanger hits it and it fixed the front end

What length rc4wd scale shocks are you running on the rear I am thinking about putting them on front and rear of mine? Thanks Gary

51WillysJeep · 12-03-2007, 03:57 PM

Mike, that thing looks SICK with the Stompers..!!! One sweet yota..!!

draven · 12-03-2007, 05:45 PM

What I mean by length is are they the 100mm 90mm or 80mm scale shocks Thanks

12-03-2007, 03:33 PM	#398
draven Quarry Creeper Join Date: Jan 2007 Location: 2 miles from nowhere MO. Posts: 372	Yeah I had the same prob. with my rc4wd servo mounts so I took a fine dremel bit too them were the front leaf spring hanger hits it and it fixed the front end What length rc4wd scale shocks are you running on the rear I am thinking about putting them on front and rear of mine? Thanks Gary Last edited by draven; 12-03-2007 at 03:51 PM.

1BadJeepBruisers Chino Clone. An RCC Legend - Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The "Chino Clone" - Chapter 2	51WillysJeep	1.9 Scale Rigs	17	05-18-2010 01:22 PM
Opinions sought: Can I get there from here? High Lift --> Chino clone	surfimp	1.9 Scale Rigs	12	12-28-2007 08:30 AM

10-23-2007, 01:54 AM	#381
Wild trial RCC Addict Join Date: May 2005 Location: the land of the midnight sun Posts: 1,451	Nice Sub. Mike.

10-25-2007, 01:53 AM	#382
YoUnG_vErSiOn REST IN ALOHA CHIP Join Date: Nov 2005 Location: * Posts: 3,549	hey mike, hit me up when you get a chance homie!

10-25-2007, 08:45 PM	#383
marzzz23 Rock Crawler Join Date: Mar 2007 Location: perkasie, pa Posts: 742	mike those are some great pics and video from Ringing Rocks, I can't wait to hit that place for some scaling in the spring or early summer when the leaves are gone. I think that place rules for scaling.

12-02-2007, 12:10 PM	#384
1BadJeepBruiser Sinking with the ship Join Date: Mar 2005 Location: El Capitan...sole survivor and sinking fast Posts: 8,864	1.9 rock stompers are sex... Yea they look that good Pics from this morning ^^ Pictures from yesterdays GTG This truck is now officially done... I just need to get some new tire CA to glue them to the wheels

12-02-2007, 12:17 PM	#385
Norcal crawler RCC Addict Join Date: May 2006 Location: California Posts: 1,361	Those look awesome. Could you take a pic of then next to a geolander please? I want to see how much taller they are. Also, do they rub on the front fenders when you steer? If not did you clearance the fenders? Thanks a lot.

12-02-2007, 12:28 PM	#386
hairyguy4 Pebble Pounder Join Date: Aug 2007 Location: london Posts: 174	dam that is one sexy hilux the stompers look sweet, how do they perform?

12-02-2007, 12:33 PM	#387
cammok5 Rock Crawler Join Date: Aug 2006 Location: nc Posts: 867	truck looks good with the stompers (and without) i see you got a bit more snow then we did down in jersey.

12-02-2007, 12:37 PM	#388
Echodawg Rock Crawler Join Date: Apr 2007 Location: Nor*Cal Posts: 663	Nice photos. Which wheels are those? Center cap? I'm about to give up trying to get these 1.9 Stompers mounted to the RC4WD beadlocks.

12-02-2007, 01:40 PM	#391
greasypete Rock Crawler Join Date: Oct 2006 Location: Germany Posts: 655	What a perfect match these tires are . That first picture looks like 1:1 again. and BTW, your snowplow is sick !! Pete

12-02-2007, 01:56 PM	#392
ColquittCustom405 I wanna be Dave Join Date: Dec 2005 Location: Orlando Posts: 7,420	I argee with everyone Mike. The second picture looks like a 1:1. Those tires look great on the clone....

Sponsored Links

12-02-2007, 02:19 PM	#393
obsession4x4 Pebble Pounder Join Date: Jul 2006 Location: Europe Posts: 103	Mike, congratulations! The truck is 100% perfect, but if you want to make it 101% (!) perfect, than you should add two alu. axles (in my opinion two RCChannels.com axles).

12-02-2007, 02:26 PM	#394
YoUnG_vErSiOn REST IN ALOHA CHIP Join Date: Nov 2005 Location: * Posts: 3,549	dude buy a blue star, this aint a commercial.

12-02-2007, 08:15 PM	#395
draven Quarry Creeper Join Date: Jan 2007 Location: 2 miles from nowhere MO. Posts: 372	Love it You have Mad skilzs bro. :-P Buy the way what did ya do to the front end suspension too free it up?

12-03-2007, 03:57 PM	#399
51WillysJeep RCC Addict Join Date: Nov 2007 Location: Massachusetts Posts: 1,184	Mike, that thing looks SICK with the Stompers..!!! One sweet yota..!!

12-03-2007, 05:45 PM	#400
draven Quarry Creeper Join Date: Jan 2007 Location: 2 miles from nowhere MO. Posts: 372	What I mean by length is are they the 100mm 90mm or 80mm scale shocks Thanks

RCCrawler Forums

Thread: 1BadJeepBruisers Chino Clone. An RCC Legend