Fat Girl 2.2 Bouncer.

[SCALER14]

As you may know this rig got Tim known world wide and got him into the game big time, this buggy also started it all. This rig was built by Ecoli, very good craftsmanship and quality. This buggy already has a thread I know, but I'm making a new one because we are changing stuff up.

*this is my dads rig, I'm posting the topic because he doesn't have an rcc account*

Parts list:
Super Shafty Bomp Proof Trans with 6mm outputs
Vanquish Trans Case (red)
Mip's
Vanquish axle housings
Vanquish knuckles front and rear
Axial universals front and rear
Axial c hubs front and rear
Vanquish Ti steering links front and rear
RC4WD ARB diff covers
Vanquish trusses
Vanquish shock mounts
Vanquish Ti 1/4inch links
100mm King shocks with custom limiter straps front and rear
36/14 hd gears front and rear
Hot Racing lockers

Electronics:
Spectrum 3channel rx/tx (twin hammers style for easier application of 4ws)
Hitec 7950th in front
Hitec 7954sh in rear
Tekin RS
CC Bec
Tekin 17.5t
Fuel cell is being made to hide these.

Wheels/tires:
Mudslingers, rears are cut, front are not. (The 1:1 ran boggers so that's why it's running these)
Mayhem Wheels (I believe Bad8's)
Custom beadlock one off water jet rings by Pyro/Taylor Hobbies.

Pictures:

[SCALER14]

Hopefully we can pick it up from the LHS this week, it is there being proffesionally soldered up!

[SCALER14]

Alright guys got it back from the LHS a few days ago, instead of using the Twin Hammers Spectrum Remote, he went with a 4ch DH4S Spectrum so he could set the end points as he'd like and it would center the rear steer back to the middle when he let off the steering. On the rocks this thing does alright with the Slingers but let me say! It's does fantastic with the TSL's on Vanquish XD's with CI foams! It's a spider on the rocks! I also like driving it with the Tekin 17.5t because you have the torque, wheel speed when you need it, and controllability!

Pics of tonight's run:

(As you can tell, this was before the TSL's were installed)

Now they were put on.

[blakeski]

nice ride gents

[SCALER14]

Originally Posted by blakeski

nice ride gents

Thanks!


Should be hitting up RBD (Ricky B Day) and wheel it with some 1:1's, probably get ol' Tim to take a look at it.

Will also meet up with Colby and see what he's up too.

[SCALER14]

Alright went to Ricky B Day and had a blast! Seen lots of 1:1 buggies and lots of carnage. Well while a 900 RZR Xp was getting flipped back on its wheels on one of the hills we were at, I busted Fat Girl out. Well lucky me Cole aka MadRam11 was standing by with the camera, here's the vid:

FATGIRL THE RC CRAWLER - YouTube

[fordsuperduty]

Looks like you were havin fun. I was down there n had a blast especially when we were over at punisher watching Eric Miller thrash on his koh buggy.

Sent from my iPhone in the shop

[SCALER14]

Originally Posted by fordsuperduty

Looks like you were havin fun. I was down there n had a blast especially when we were over at punisher watching Eric Miller thrash on his koh buggy.

Sent from my iPhone in the shop

I was also watching him, that's the purdiest sounding motor I've ever heard!

[Epcampau]

Great looking ride. Seen a video the other day on youtube for this rig. Pretty cool

[fordsuperduty]

Originally Posted by SCALER14

I was also watching him, that's the purdiest sounding motor I've ever heard!

Yes it is although I still like the scream of ultra bouncer and those 180 degree headers.

Sent from my iPhone in the shop

[SCALER14]

Originally Posted by fordsuperduty

Yes it is although I still like the scream of ultra bouncer and those 180 degree headers.

Sent from my iPhone in the shop

Did you see the Polaris Ranger 6x6? If so that was me and dad.

[fordsuperduty]

Yeah I remember it goin up Los primos

Sent from my iPhone in the shop

[SCALER14]

I might try and fit the wraith interior into it, it's already cut and ready to be fitted in.

[fordsuperduty]

Originally Posted by SCALER14

I might try and fit the wraith interior into it, it's already cut and ready to be fitted in.

Wraith interiors look good in most everything just add a few scale decals to add some depth to them so they don't look to 2d

Sent from my iPhone in the shop

[SCALER14]

Yeah they will be put on for sure!

[SCALER14]

Got ahold of Matt aka Busted Knuckle Films at a 1:1 ride about a week ago and asked him to send us some scale stickers to represent, he sent some without hesitation.

[Tbmitchell]

nice