Siggy's Axial Racing RBX10 Ryft SMART Rock Bouncer

[Siggy]

7075 Precision Machined Front, Rear, and Rear Mirrored (Rear Steer) Axles

[Siggy]

7075 Precision Machined Rear Sway Bar

[Siggy]

2.2 Ryft Beadlock Wheels

[Siggy]

Vitavon HD Steel Axle CVD


Vitacon 7075 Servo Guard

[Siggy]

HD Lockers

[Siggy]

Vitavon Genuine Carbon Fibre Panels

Attachment 395484

[SteveB1]

Thanks Siggy,



As a machine shop nerd, I'm always curious as to the manufacturing process of parts. I looked over the shape and it looked cast, but I wasn't sure.



s.

[Siggy]

Originally Posted by SteveB1

Thanks Siggy,



As a machine shop nerd, I'm always curious as to the manufacturing process of parts. I looked over the shape and it looked cast, but I wasn't sure.



s.

Vitavon did design and precision machine RC Parts to help small Shop - US registered RC Entity/Brandname. This US Aftermarket Online Retailer does not have any experience or capability for design or own Machines to produce Quality in the USA. In fact, we recently accommodated a request to machine a second run, as you guys seem to love our re-Design and 7075 Quality Products. Some of you claiming these US Branded "hop-up" is the Best in RCC - Thanks!

Anyways, to set the record straight and feed your curiosity with only the Truth -- Vitavon Racing Development employs a Team of Professional Designers and owns a good number of Precision Machines, to design and precision machine in OEM Quality 7075. Vitavon owns a Production Facility in China doing OEM Products for MNC's in Italy and Germany, that requires tjhe company to adopt High OEM Standards for each Product.

Vitavon has implements the same OEM Dtandards in original re-designs, precision machining, and selecting OEM Quality Raw materials and Hardware for the Axial RBX10 Ryft, SCX10-III, and Capra. Losi 5T, SRR, SBR, BR and RR, Lasernut, and LMT. Traxxas UDR, TRX4, TRX, MAXX and XMAXX. ARRMA Kraton EXB 8S and 6S, Outcast 8S and 6S. We Collaborate with Team Vitavon Racing's 5.1K Drivers Worldwide.

I hope that the explanation full satisfies your Curiosity. Thank you for your attention and hoping for your kind regards for our Honest Endeavour.


Let's ALL ENJOY the RC Hobby! Thanks RCCrawler!

[SteveB1]

Thanks Siggy,



Appreciate the info.



s

[Siggy]

https://youtu.be/KmVrYAhgb1Q

[Siggy]

NEW 7075 Aluminium Skid Plate
for the NEW Axial® RBX10™ Ryft™ RTR & Kit💖

[Siggy]

Custom Builder's Checklist:

[RockCrawlingKid]

Originally Posted by Siggy

NEW 7075 Aluminium Skid Plate
for the NEW Axial RBX10 Ryft RTR & Kit

Attachment 395774

Attachment 395775

That skid looks amazing! I have a question, regarding lockers. Would it be possible to produce a hardened steel spool that bolts directly to the ring gear eliminating the plastic case? I don’t want inserts for the factory plastic case. Thankyou


Sent from my iPhone using Tapatalk

[Siggy]

Originally Posted by RockCrawlingKid

That skid looks amazing! I have a question, regarding lockers. Would it be possible to produce a hardened steel spool that bolts directly to the ring gear eliminating the plastic case? I don’t want inserts for the factory plastic case. Thankyou


Sent from my iPhone using Tapatalk

Some have requested, as you describe. Interestingly, the Current Requests from our Ryft Drivers -- are for HD Steel Gears. Note that these are the same Drivers that wanted a Spool &Locked like the ones we have popular for Rock Crawlers --to make it super strong & super lite lite. Others are asking for 7075 diff case to have the option to revert to the RTR Diffs or with the lockers.

This is the Current Trend and we reworking on the Gears to match strength of our NEW HD Steel Universal CVD Axles & Rear Axle Straight. And HONESTLY, most likely NEXT the 7075 diff case. Then the Center Universal F/R Shafts, then the Spool if there will be a request by our Drivers a 2-3 months down the road.

And yes we are working on a Surprise RACE Component, we believe that Custom Builders of Competition Ready Rock Bouncers or Rock Racers will most likely LOVE. this is to thanks you guys fr the support and Trust, and an attempt to demonstrate Team Vitavon Racing Strong Capability, CREATE from Concept, to Original Design, Prototype Testing, and executing OEM Quality Precision Machining in Record Time! Quality Service is our #1 Priority!


Thank you for your Kind Interest & Support!

[RockCrawlingKid]

Thankyou for the reply! I look forward to the gears. I would really like to keep a diff in the front. Just currently the gears are such junk a locker is the obvious choice at the moment. looking forward to what’s in store


Sent from my iPhone using Tapatalk

[Panther6834]

Looking forward to whatever that "surprise" is. Today, received the Vitavon wheels & sway bar for the Ryft (have everything on the 'list', except locker, skid, & transmission case), as well as the steering bell crank for my X-MAXX (the final Vitavon part for that vehicle).

Vehicles are "Vitavon Strong".


~ More peace, love, and kindness would make the world a much better place

[Siggy]

Originally Posted by Panther6834

Looking forward to whatever that "surprise" is. Today, received the Vitavon wheels & sway bar for the Ryft (have everything on the 'list', except locker, skid, & transmission case), as well as the steering bell crank for my X-MAXX (the final Vitavon part for that vehicle).

Vehicles are "Vitavon Strong".


~ More peace, love, and kindness would make the world a much better place

Thank you for your kind Interest and STRONG Support, & HONEST Feedback!

Interesting how some still have this Business Model of contracting Small Machine shops in China to do cheap scanned copies in Aluminium, and mange to quickly sell at Premium Price. Same guys that sponsor Team Drivers and Facebook Bloggers to say that ALL Made in China is Cheap in Price & Quality.

Anyways, we will continue to do our BEST, to share our experience and strong capability, and commitment for both Quality & to 5.2K Team Vitavon Racing Driver Worldwide and the RCCrawler Community.

Big Thanks to you Awesome People at RCCrawler.Com! Together, we can reshape the Future of how our Kids can also Totally Enjoy the RC Hobby as we all did, with their Friends and Growing Family.

[Siggy]

Originally Posted by RockCrawlingKid

Thankyou for the reply! I look forward to the gears. I would really like to keep a diff in the front. Just currently the gears are such junk a locker is the obvious choice at the moment. looking forward to what’s in store


Sent from my iPhone using Tapatalk

We continue to value your suggestion and requests. And are Currently Working on an HD Steel Spool that will mount Perfect the kit Ring Gear without the need of a Diff Case. And I believe an HD Steel Ring Gear & HD Pinion for the Ryft. The Spool was redesigned for Front and Rear Axle and Transmission Center Differential. It cost more to produce compared to the HD Steel Lockers.

[dhdb]

Originally Posted by Siggy

Team Vitavon Racing 7075 Front and Rear 7075 Axles
reviews best paintballs guns
Attachment 394333

that's amazing <3

[Siggy]