RCCrawler Forums

jetboat · 10-07-2008, 05:30 PM

Here is the final version of the servo plate. Unfortunatly I cannot cut the final version of the Tie rod on a manual mill.

As you can see there is now plenty of room for a lipo to sit. Also I added a mounting hole for an optional brace.

The production versions will come just as you see it here unless you order special machining.

addictedtonitro · 10-12-2008, 09:33 PM

I seen these today in person. Jeff spent a lot of time into these and it shows! They look and perform great. With the bta he SERIOUSLY improved his aproach angles. And they held up flawlessly. If I ran axial axles a set for sure would of been coming home with me . I almost bought a set just in case I decided to run axials lol

Great job man. Now get started on the wk ones lol

jetboat · 10-16-2008, 03:22 PM

WK testing is underway... Ive been having issues with steering angle on the wk though. Bob ended up taking the sample home with him, not sure what truck he is putting it on.

I ran 2 comps this past weekend with the set up and it helped me get out of a couple situations (didnt help in a couple others) Being able to drive straight up to an obsticle and go right over it ROCKS!

I expect to have the tie rods and servo plates in stock early next week. I have a few spacers and I have placed an order for more all in aluminum, no plastic.

Ill extend the preorder price until 10/22 after that they will go up to $18 shipped and $16 for club orders. Aluminum prices keep going up so after this shipment is gone the price may have to increase.

Starboard M · 10-16-2008, 05:51 PM

So the servo plate/battery mount also doubles as the 4 link mount as well? Are those the two small holes towards the back of the plate? Thats what it looks like in some of the pics.

Are there any servos that dont work with this setup?

Im putting money into my paypal at the moment, so Ill be ordering some in the next couple of days.

jetboat · 10-16-2008, 06:04 PM

The first picture shows the kit as it comes, the second shows the tie rod installed and the third shows the kit fully installed.

Ill be putting up an official vendor thread also. All orders placed before Monday will ship Monday.

$16 till Wednesday then the price goes up to $18
$16 for club orders over 10

Paypal: Jshirley78@hotmail.com

I use the shipping address on your paypal

jetboat · 10-16-2008, 06:06 PM

the servo mounts incorp a 4-link mount
I have found no servo they wont work with (servo mounting is adjustable)

jetboat · 10-17-2008, 10:52 AM

official for sale thread is now up:
AX10 BTA with 4 link and Battery mount

10-16-2008, 03:22 PM	#23
jetboat I wanna be Dave Join Date: Dec 2005 Location: Tax Nation Posts: 2,289	WK testing is underway... Ive been having issues with steering angle on the wk though. Bob ended up taking the sample home with him, not sure what truck he is putting it on. I ran 2 comps this past weekend with the set up and it helped me get out of a couple situations (didnt help in a couple others) Being able to drive straight up to an obsticle and go right over it ROCKS! I expect to have the tie rods and servo plates in stock early next week. I have a few spacers and I have placed an order for more all in aluminum, no plastic. Ill extend the preorder price until 10/22 after that they will go up to $18 shipped and $16 for club orders. Aluminum prices keep going up so after this shipment is gone the price may have to increase. Last edited by jetboat; 10-16-2008 at 03:33 PM.

10-16-2008, 06:04 PM	#25
jetboat I wanna be Dave Join Date: Dec 2005 Location: Tax Nation Posts: 2,289	Their in stock!!! The first picture shows the kit as it comes, the second shows the tie rod installed and the third shows the kit fully installed. Ill be putting up an official vendor thread also. All orders placed before Monday will ship Monday. $16 till Wednesday then the price goes up to $18 $16 for club orders over 10 Paypal: Jshirley78@hotmail.com I use the shipping address on your paypal Last edited by jetboat; 10-16-2008 at 07:42 PM.

10-07-2008, 05:30 PM	#21
jetboat I wanna be Dave Join Date: Dec 2005 Location: Tax Nation Posts: 2,289	Here is the final version of the servo plate. Unfortunatly I cannot cut the final version of the Tie rod on a manual mill. As you can see there is now plenty of room for a lipo to sit. Also I added a mounting hole for an optional brace. The production versions will come just as you see it here unless you order special machining.

10-12-2008, 09:33 PM	#22
addictedtonitro Rock Crawler Join Date: Mar 2008 Location: hillbilly illinois Posts: 503	I seen these today in person. Jeff spent a lot of time into these and it shows! They look and perform great. With the bta he SERIOUSLY improved his aproach angles. And they held up flawlessly. If I ran axial axles a set for sure would of been coming home with me . I almost bought a set just in case I decided to run axials lol Great job man. Now get started on the wk ones lol

10-16-2008, 05:51 PM	#24
Starboard M Newbie Join Date: Sep 2007 Location: CO Posts: 37	So the servo plate/battery mount also doubles as the 4 link mount as well? Are those the two small holes towards the back of the plate? Thats what it looks like in some of the pics. Are there any servos that dont work with this setup? Im putting money into my paypal at the moment, so Ill be ordering some in the next couple of days.

10-16-2008, 06:06 PM	#26
jetboat I wanna be Dave Join Date: Dec 2005 Location: Tax Nation Posts: 2,289	the servo mounts incorp a 4-link mount I have found no servo they wont work with (servo mounting is adjustable)

10-17-2008, 10:52 AM	#27
jetboat I wanna be Dave Join Date: Dec 2005 Location: Tax Nation Posts: 2,289	official for sale thread is now up: AX10 BTA with 4 link and Battery mount

Sponsored Links

RCCrawler Forums

Thread: JetDesigns BTA for stock knuckles